Sierra Charlie Posted March 29, 2017 Share Posted March 29, 2017 Hoping someone can help me with some know how advice please. I have just purchased a towbar (minus the electrics) for my 2009 Fusion. I have no issues with the fitting of the towbar, however I would like to know a little more about the towbar wiring. On previous vehicles I have used 7 core cable and connected straight into the wiring loom at the rear of the vehicle using scotch locks. I do vaguely recall someone telling me last year shortly after I purchased my Fusion that you can not wire a Fusion towbar electrics straight into the wiring loom with scotch locks as the ECU will throw a "wobbly". Anyone confirm or deny please. Quote Link to comment Share on other sites More sharing options...
leesid Posted April 6, 2017 Share Posted April 6, 2017 i dont think the 2009 has got "bulb failure" so should just be a straight normal wire up. if it has got bulb failure you'll need a "candy box" http://www.ebay.co.uk/itm/Towbar-Wiring-Kit-7-Pin-Universal-12N-Electrics-7way-Bypass-Relay-955-800-H1-/121807211561?hash=item1c5c468c29:g:c2AAAOSw7hRWOw~p as shown here in this eBay ad Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.