Sign in to follow this  
MONDYROB

2016 Mondy reverse sensors, self fitted

Recommended Posts

Just fitted a 4 pack  (gloss black) Dolphin sensors to rear bumper, circa £24.99, amazon, not in the upper portion of the bumper just below tailgate, but in the black gloss decor strip between twin exhausts. Look very good, not obvious as per the usual / factory preferred location, as car is ice white. Gloss black blends in well here.  The sensors are 45-46cm above ground and work very well. They are at a slightly higher in height to our 2011 Mondy, that uses xvision after market set, 36cm off ground dealer fitted.

Question:-  The 2016 mondy reverse cable, N/S boot, what colour?  Is it the green and black as like the Kuga loom? Have taken feed from tailgate which extended the job by about 1hr.  The Kuga owners club suggests it is green and black.

Cheers

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this