Skip to content
View in the app

A better way to browse. Learn more.

Ford Owners Club - Ford Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.



Join the Independent Ford Owners' Club

Our community has been built by enthusiasts, for enthusiasts, and proudly run by Ford owners' for over 18 years. As an independent, non-official club, everything you’ll find here, advice, support, and opinions, comes directly from members with genuine Ford ownership experience.

Join our friendly community... it's Free!

 

Lowering springs for a mk7.5 titanium

Featured Replies

Hi All, First post so go easy! I'm looking at maybe lowering my 2014 Fiesta titanium. I don't want anything too agressive Just want to close the gap above the wheels a bit. I really like the stance on the zetec S so would like to get it to something like that. I don't want to go too low as all around my area are speed bumps and some of them are pretty nasty. I was wondering if anyone knows how much lower the zetec S is compared to the Titanium and what sort of options there are.

Could I go to a ford dealers and ask for them to fit zetec S springs on it instead? Or do Eibach do some which would give me the look i'm after?

Cheers for any help.



Going to ford would mean you'd end up paying more than what it would cost to upgrade to a zetec s, it's ridiculous imo. Springs/coils are easy enough to fit yourself if you have the tools, you'll just need an allignment after.

Possibly see if a breakers close by has something from a zetec s or an ST you can buy. Other than that eibach should sell some.

  • Author
Going to ford would mean you'd end up paying more than what it would cost to upgrade to a zetec s, it's ridiculous imo. Springs/coils are easy enough to fit yourself if you have the tools, you'll just need an allignment after.
Possibly see if a breakers close by has something from a zetec s or an ST you can buy. Other than that eibach should sell some.

I was thinking something like the eibach 30mm springs as they're 164 quid. Wasn't planning on a full suspension swap just to lower mine slightly to make it look nicer as it sits quite high around the wheels.
  1. With the Eibach  springs alone you will be ok, but be careful with just lowering  springs of other makes as you will find you will need to change the dampers to match as well or the ride will be awful every time you hit a pot hole you will know it  as the damper doesn't have its full movement I know as I have done this by mistake. Eibach are fine on their own as they are designed to do this with standard dampers.
  • Author

So I couldn't go into ford and get the zetec s springs? Or does the zetec s use different suspension compared to the titanium? I did read somewhere that ford use eibach as aftermarket springs.

9 minutes ago, mikeshaw91 said:

I did read somewhere that ford use eibach as aftermarket springs.

Yes that's right

21 hours ago, mikeshaw91 said:

So I couldn't go into ford and get the zetec s springs? Or does the zetec s use different suspension compared to the titanium? I did read somewhere that ford use eibach as aftermarket springs.

Zetec S springs are 10mm lower than standard. I think they'd be expensive from Ford, but could be wrong. A wreckers might be cheaper if you can find a newish car. If they are expensive you might be better if jumping straight to the Eibachs which also have a higher spring rate. Not sure if the dampers are any different from standard. 

ford parts uk sell eibach springs a suggest these as zetec s isnt really low at all and won't close the gap there only 10mm lower eibach is 30mm and look a lot better with going over bumps easily 

 

a know ppl who changed to zetec s and had them off in a week hated them as wasnt low at all 

ma car is the blue titanium to the left 

IMG_20170424_185857_932.thumb.jpg.ad7764c673f78bb6c4e5b2c12caa7ce1.jpg

 

  • Author
On 25/04/2017 at 7:27 AM, Paramanic said:

ford parts uk sell eibach springs a suggest these as zetec s isnt really low at all and won't close the gap there only 10mm lower eibach is 30mm and look a lot better with going over bumps easily 

 

a know ppl who changed to zetec s and had them off in a week hated them as wasnt low at all 

ma car is the blue titanium to the left 

IMG_20170424_185857_932.thumb.jpg.ad7764c673f78bb6c4e5b2c12caa7ce1.jpg

 

Yeah I do like the gap on yours, suits it so much better, cheers for the help, something for me to think about at least!

is it possible to buy the eibach springs singly i.e only one , my thinking is if you have them fitted to you car and one breaks ( which with the condition of most of the roads in this country is a big possibility ) I don't wont to have to buy a set of four again just to replace one ps James that's a lovely looking car mate.

On 27/04/2017 at 6:28 PM, steve1312 said:

is it possible to buy the eibach springs singly i.e only one , my thinking is if you have them fitted to you car and one breaks ( which with the condition of most of the roads in this country is a big possibility ) I don't wont to have to buy a set of four again just to replace one ps James that's a lovely looking car mate.

hey bud thanks! 

no bud but I have known hundreds of people using them and none have broken and I know idiot drivers who fly over potholes lol still hasn't broke 

cheers mate thanks for your reply.

  • 7 years later...
Ron how low it gets at the front4/25/2017 at 8:27 AM, Paramanic said:

ford parts uk sell Eibach springs a suggest these as zetec s isnt really low at all and won't close the gap there only 10mm lower Eibach is 30mm and look a lot better with going over bumps easily 

 

a know ppl who changed to zetec s and had them off in a week hated them as wasnt low at all 

ma car is the blue titanium to the left 

IMG_20170424_185857_932.thumb.jpg.ad7764c673f78bb6c4e5b2c12caa7ce1.jpg

 

I just found your post and was wondering if you have some more pictures of the fitment. I have the same front bumper and was won

Latest Deals

Ford UK Shop for genuine Ford parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

The "Digestive"






Background Picker
Customize Layout

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.