Hello guys! 

I've come across a slight issue with my new Crossover pipe from R-Sport.

It seems there is a breather pipe of some sort which connects to the right hand side of the new crossover pipe as seen in the picture and when it came to fitting it, this hose will kink badly, blocking all air from passing through. This obviously in turn will put the car straight into limp mode. I've tried all sort of ways of connecting this hose but it just seems to bend and kink.

Has anyone else had this issue and managed to overcome this? I really don't want it to be the case of £100 wasted. 

Any help will be brilliant, thanks. 

what does the hose look like, could you get some sort of hose and make one yourself. 

On 09/01/2018 at 8:20 AM, AlexBartlam said:

what does the hose look like, could you get some sort of hose and make one yourself. 

I haven't managed to get a picture, but I believe to have found this hose to be a cam cover breather hose. Just doesn't seem to go on at all without kinking. In the process of trying to find similar size hoses for it. 

Hay Nathan 

i‘m having same issue did you find a good solution ?

mark

Sent from my SM-G965F using Tapatalk

I had the same issue when fitting my cross over pipe. Ended up using some silicon pipe as its very flexable and leaving it a bit longer than you would normally.

 

I just zipped out and took a few pics of mine - 

https://photos.app.goo.gl/vBC7ThFNYzbpiiax7

https://photos.app.goo.gl/UvJBgoq9KNFe49zE6