11 minutes ago, SteBowker said:

nope doesn't give you the tyre pressure option unfortunately, its missing which is weird, i defo remember been able to see the pressures on my analogue cluster  

What have you got at the following:

720-04-01 x*xx xxxx xx
720-09-01 xxxx xxxx x*

1 hour ago, alexp999 said:

What have you got at the following:

720-04-01 x*xx xxxx xx
720-09-01 xxxx xxxx x*

Hi mate thanks for the reply, I wouldn’t be able to check those values till end of the week when im back from working away, can you point me in the right direction on where I would find those values please mate? I think you might be taking me to the correct path on getting this fixed so thank you for that, never thought to look at that side of things. 
 

thank you 

Steve 

15 hours ago, SteBowker said:

Hi mate thanks for the reply, I wouldn’t be able to check those values till end of the week when im back from working away, can you point me in the right direction on where I would find those values please mate? I think you might be taking me to the correct path on getting this fixed so thank you for that, never thought to look at that side of things. 
 

thank you 

Steve 

 

Mine were the same on both Analog and Digital, I just wonder if it's got messed up. Would be worth you comparing your current values in those places to your original asbuilt.

Just be aware, they represent more than one setting. A lot of asbuilt bits are 3 settings in one and the combination determines the final hex value.

If you use Forscan in asbuilt mode, you can see the block values.

EDIT:

Just going back through the other posts, I see you've said yours is from a 2022, which is the facelift. This uses a different part/firmware to the 2020/2021 prefacelift. The 2022 ends SCx, the 2020 ends SXx (I have an SXB). When I've looked at 2022 asbuilts, they are a bit different due to the update to Sync 4, moving more info/options to that.

Hi everyone, I'm looking for a solution regarding my handbrake light issue. I've recently replaced the clock, but now the light remains constantly on. My clock model is "NX7T-10849-SCC." Could anyone share their insights or suggestions? Thank you!

2 minutes ago, lualbert said:

Hi everyone, I'm looking for a solution regarding my handbrake light issue. I've recently replaced the clock, but now the light remains constantly on. My clock model is "NX7T-10849-SCC." Could anyone share their insights or suggestions? Thank you!

It might be too new. The SCx clusters are from the facelift. 
 

The pre facelift clusters are SXx and people have had most success with the SXB firmware. I don’t know if the SC cluster can be downgraded to SX firmware. 

20 hours ago, alexp999 said:

It might be too new. The SCx clusters are from the facelift. 
 

The pre facelift clusters are SXx and people have had most success with the SXB firmware. I don’t know if the SC cluster can be downgraded to SX firmware. 

Thank you alexp999. Where can I Found the firmware? Any other ideas on how we can fix the issue?. I already copy all as built codes from analog clock to Digital one.

Cheers

 

 

 

On 1/13/2025 at 1:22 PM, Tezza said:

I've got one that I'm selling from a 2021 focus st if anyone is after one it's got 9400 miles showing 

How much you wanting for the digital display Tezza and why are you not sticking with it over analogue dials?

Hi folks, I have an NX7T-10849-SCC cluster, and I'm having trouble turning off the handbrake light. Do you have any suggestions on how to resolve this? I've already tried updating the ABS module firmware using Forscan, but it doesn't detect any updates. I can see upgrade options for other modules, but not for the ABS one. 

I would really appreciate your help, as I've been trying to fix this for almost two months. Thank you!

Hello. I just switched from analog to digital instrument clusters. I fixed the handbrake icon error by updating the ABS, and everything works except for one thing. The ESP off button doesn't work. The system is always on, and when I try to turn it off with the button, nothing appears on the display, and Forscan shows an error (C1109 ABS - ESP control switch - signal plausibility error). Does anyone have any ideas on how to solve this?