Hi,

I have noticed that deadlock on my Galaxy is not working (I don't know was it ever working) when I press the lock button two times. Indicators blinks when you lock the car, and all door are locked (anti-theft red led is not blinking).

Also, when I lock the car parking brake led will stay on for some and then it will turn off, sometime I can hear some noise from hood fuse box from relay 6G9T14B192EA and at the same time the parking brake light will come on, and another think is if you press the boot switch/handle the same light will come on.

I will add the fact the sometimes driver side window will not close automatically, like it has some obstruction and will roll down.

Welcome!
To rule out this common fault, check all plugs (the green one on ours?) on the BCM under passenger side glove box for signs of corrosion due to washer pump fluid coming up the cables into PCB - if this applies to your model.
Never seen Made in USA tags on any Ghenk made model??

Hi,

first of all thank you for your feedback.

All plugs are in good condition and there is no sign of corrosion. Also all of those relays are Made in USA.


I would just add that Delphi diagnostics is not showing any error codes.


Do you know which module is for "dead lock"?

Again, never seen any USA made parts but engine management is definitely Delphi.

Forscan lists all the modules, does Delphi so you can post them for someone to say which may be relevant?