Honestly I do not want to remove mat now, little bit to cold for me.

You can find picture in this thread - post #8

http://www.fordownersclub.com/forums/topic/30877-mist-washer-jets/page__hl__%2Bmist+%2Bjets

You will see piece of blue tube connecting valve and jet. I did it shorter, as short as possible and that is it.

Thanks Peter, mine doesnt look like this, hence mine still leaking. will sort it out soon.

I can recommend these:

http://www.ebay.co.uk/itm/WINDSCREEN-SCREEN-WASHER-JET-NON-RETURN-VALVE-5-MM-NEW-/271034453167?_trksid=p2047675.m1850&_trkparms=aid%3D222002%26algo%3DSIC.FIT%26ao%3D1%26asc%3D11%26meid%3D4984639945792718957%26pid%3D100011%26prg%3D1005%26rk%3D1%26sd%3D250863140738%26

I know they are not cheap, but genuine and high quality.

Hi bud just got these through the post just a quick question what end goes where lol

I see an arrow pointing up

Thanks

Arrow shows direction of fluid flow. It must point towards washer jet.

Thanks a lot

I should've just read your guide, only 2 posts above mine lol silly me

I've ordered both mist jets and the valves - are the valves needed for the mist ones??

Yes, use the valves for all types of nozzles.

Yep, you're right - non return valve's needed!

I fitted the mist jets today, they make a huge difference on the coverage, but the dribbles are still there!

I've fitted the valves, and the passenger side doesn't leak afterwards, but the drivers side does?

Would I need a fit a longer hose or slightly shorter? The ones I have fitted are around 3cm long.

having dove into back streets and drove on the wrong side of the road to avoid gritters and standing water to keep my car clean i was gutted to see these dreaded marks on my bonnet today!

looked on ebay at mist jets wondering if other makes or universal ones would fit and i came across this

http://www.ebay.co.uk/itm/Peugeot-407-Mist-Washer-Jets-NEW-GENUINE-ITEMS-/330520265064?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item4cf48b0168

..now i know they wont fit, but i was more curious about what could well be 2 none return valves on each one as standard?

or are they something else?

Tom