Update!

Slight changes but with big difference.

Changed twin exhaust tips from 2.5 inch straight tips to slashed 4 inch.

Before

After

Yunii

Before

After

The tips are further in & doesnt stick out & is much closer to the diffuser. As where old straight tips were showing a big gap from diffuser to tips.

Yunii

Liking the angled tips more than the previous ones. How does it all sound now?

Not too bad. But will get better as it wears in

Yunii

I thought it was time to give car a treatment. So i washed it & then waxed it with meguirs mirror glaze wax.

Here is the result.

Yunii

Yunii

The alloy wheels colour are awesome! Like them a lot.

Looks mint :D

Mines filthy thanks to builders working next door. :(

Looks mint :D

Mines filthy thanks to builders working next door. :(

I'd hate that . Send them car wash bill .

Its pretty good apart from some key scratch on passerside rear & small one on wing & one deep scratch on a pillar across both driverside doors.too costly to do these .prabably & do it sometime.plus need the cash to do it.

Yunii

Trouble is you can't stop people doing work on there house. I need some stone chips doing on the bonnet, and ideally a good mop to remove some scratches. But it's time and money like you said.

Update!

I should have done this ages ago but didnt have chance. I bought the focus mk2 /2.5 usb/ aux switch which replaces blank switch. But didnt wire it up. Behind the stereo their us a multiplug for 12v outlet taped up in the loom just below the radio. ( note this might be already used up on non keyless keyfree push button engine start cars. As mine has push start button where other lower spec models have 12v power outlet next to gear surround.

The switch has a push in button for power on & illumenates.

Off

On.

Yunii

Update!

Few weeks ago bought st225 gauges /pods & surround. Instead of somehow lighting up the st gauges did this instead.

My dash before had the storage tray bin , as these over time have issues with lid breaking the lock tab.

In the process of marking up the cut out of st gauges . Removed the gauges from the casing & ripped the dial rings out , next i cut out of the perspex on the front.

Looks good , what are your plans for the pod?, stick am adroid phone in there with torque pro ☺

Removed the lid from storage tray

This is what i have fitted. I trimmed the st gauges casing short so i dont have to cut in bottom of storage bin

Next i made a trip to scrappy & ripped out a diagnostic socket plug for dummy purposes & so that car cant be stolen.

I got some vynyl to stick around the scangauge ii

& finally fitted it.

Currently its not sealed flushed to storage tray base but looks good lit up . Happy with results but need tweeking a little.

Yunii

Looks good , what are your plans for the pod?, stick am adroid phone in there with torque pro ☺

I fitted a scangauge ii which i had lying around unused.

Yunii

Very nice mate good job ☺

Very nice slick job. Any close up pictures? What kinda data can you get from it?

Very nice slick job. Any close up pictures? What kinda data can you get from it?

it gives you info on :

Hpr/water temp/ oil temp/ battery amp/ fuel pressure sensor / engine revs/ coolant temp/also delete or read fault codes/ so much more & its got various colours display. Had it nearly 6-7yrs now. Had it fitted in my my mk1.5

I will try doing a vid or close pics. google scangauge ii to get a better idea. Btw not cheap new. I only paid£65 used back then 6-7 yrs or more.

Yunii

Read these screenshots may have to zoom in.

Yunii

Closer pics

Yunii

Looks great Yunii