CB4sF1NEST Posted May 23, 2015 Share Posted May 23, 2015 Just a quick question, Does the MR165 affect warranty? I don't really want to get it done before my warranty is up as I fear i'll blow the turbo with the extra power... <_< Cheers! Quote Link to comment Share on other sites More sharing options...
Willy Posted May 23, 2015 Share Posted May 23, 2015 It does affect warranty. Part are covered still but map has Mountune 12 month warranty. Quote Link to comment Share on other sites More sharing options...
Willy Posted June 7, 2015 Share Posted June 7, 2015 Another mod I'm about to do :) Quote Link to comment Share on other sites More sharing options...
MarksST Posted June 7, 2015 Share Posted June 7, 2015 Oh oh the custards taking over, lol. Bold, i was going to say get the mirrors wrapped to match the stripe when you had that fitted. 1 Quote Link to comment Share on other sites More sharing options...
Willy Posted June 7, 2015 Share Posted June 7, 2015 Going cheap on eBay so couldn't resist. Quote Link to comment Share on other sites More sharing options...
000 Posted June 26, 2015 Share Posted June 26, 2015 Hi all, Thinking of upgrading to the MR165, are there any cons apart from the irreversible map? Are there any MPG gains to be had if you drive sensibly? Does it feel a lot faster? Cheers Quote Link to comment Share on other sites More sharing options...
Willy Posted June 26, 2015 Share Posted June 26, 2015 You won't drive it sensibly ;) It's FAST :D 4 Quote Link to comment Share on other sites More sharing options...
CB4sF1NEST Posted June 26, 2015 Share Posted June 26, 2015 Anyone had a tear up against a ST yet with the upgrade done? If so does it actually keep up? Does the kit also stop the 5th gear 4k limiter? Cheers Quote Link to comment Share on other sites More sharing options...
Cablelad Posted June 26, 2015 Share Posted June 26, 2015 Ordered the 165 on Saturday during the 20% deal, is it simple to fit the intercooler?, Quote Link to comment Share on other sites More sharing options...
Willy Posted June 26, 2015 Share Posted June 26, 2015 It's possible without removing the bumper but is a pain. Quote Link to comment Share on other sites More sharing options...
Willy Posted June 26, 2015 Share Posted June 26, 2015 http://www.fordownersclub.com/forums/index.php?/topic/68755-Mountune Quote Link to comment Share on other sites More sharing options...
Cablelad Posted June 26, 2015 Share Posted June 26, 2015 Thanks Willy...was dreading that answer. Quote Link to comment Share on other sites More sharing options...
Willy Posted June 26, 2015 Share Posted June 26, 2015 You'll be fine. Don't rush it and wear gloves. The jobs only requires basic tools and takes about an hour for the intercooler. Quote Link to comment Share on other sites More sharing options...
Cablelad Posted June 27, 2015 Share Posted June 27, 2015 Will adding the Milltek (sports cat) turbo back exhaust cause any issues with this map? do I need to speak to mountune ? and will it push the 170bhp mark. Reviews state a '10-12bhp gain' and require a stage 2 remap. Quote Link to comment Share on other sites More sharing options...
aleksios Posted June 28, 2015 Share Posted June 28, 2015 Will adding the Milltek (sports cat) turbo back exhaust cause any issues with this map? do I need to speak to mountune ? and will it push the 170bhp mark. Reviews state a '10-12bhp gain' and require a stage 2 remap. im very curious also about that mr165 + milttek sports cat! will it work ? Sent from my iPhone using Ford OC mobile app Quote Link to comment Share on other sites More sharing options...
MarksST Posted June 28, 2015 Share Posted June 28, 2015 As the kit doesn't use any parts of the exhaust, I would think the map wouldn't have been calibrated to use it, I know sports at aren't meant to put up the engine light but you never know. They may have an exhaust in development, if so they would have an update via mtune for it. Quote Link to comment Share on other sites More sharing options...
Cablelad Posted June 28, 2015 Share Posted June 28, 2015 Thx Mark, I've emailed mountune to see if it will effect it. Really want to stick a full system on the ecobeast, as my current ones rusting away. Quote Link to comment Share on other sites More sharing options...
Riordian Posted June 29, 2015 Share Posted June 29, 2015 Don't install any kind of exhaust if you are going to get the mr165...The exhaust will NOT work with this kit, because it is not calibrated to do so! I really really want to install this kit on my fiesta as well, too bad it is out of stock :( . I think I will buy it piece by piece so it will be easier to cope with, financially. 165, give or take, bhp on a 1.0 without an exhaust is really something! About the mr165 vs stock ST. Don't even try it guys :P. First of all don't consider the ST as a 182hp car, because it isn't. It's 197 and it is confirmed, so the outcome of this race will be a nightmare for the poor 1.0 :P 1 Quote Link to comment Share on other sites More sharing options...
Cablelad Posted June 29, 2015 Share Posted June 29, 2015 Yeah guys your right, spoke to Mountune this morning and the guy confirms it 's not set for a sports cat and will cause issues. Asking if it will ever be set up, he stated there working on the Mustang parts and may come back to the 1.0 in the future... As for fitting a back box he stated no issues. Well at least I can have a part Milltek system. Quote Link to comment Share on other sites More sharing options...
Cablelad Posted July 4, 2015 Share Posted July 4, 2015 :)Blue Mr165 has arrived, will get it fitted and post some pics. Also replacing the zetec s springs with Eibach pro kit and 15mm spacers all round, standard titanium wheels have gone replaced with a bargain set of Rado greys and Milltek cat back. 1 Quote Link to comment Share on other sites More sharing options...
Paramanic Posted July 11, 2015 Share Posted July 11, 2015 Remember the pictures! Quote Link to comment Share on other sites More sharing options...
Cablelad Posted July 11, 2015 Share Posted July 11, 2015 Lol bud, a full set will be uploaded. Quote Link to comment Share on other sites More sharing options...
Cablelad Posted July 19, 2015 Share Posted July 19, 2015 Air box and pipes fitted, what a nightmare that little pipe is.......ripped my hand apart trying to free it. (thanks willy for advice on using fairy liquid) Just need to rip out the intercooler and install the two pipes and add the map. How does the intercooler come out....HELP. Willy wish you had done a guide........ :D 1 Quote Link to comment Share on other sites More sharing options...
Willy Posted July 19, 2015 Share Posted July 19, 2015 Have a read here mate. http://www.fordownersclub.com/forums/topic/69347-mountune-ordered/?p=473643 Quote Link to comment Share on other sites More sharing options...
Willy Posted July 22, 2015 Share Posted July 22, 2015 Cablelad here's a piccy of the clip that needs removing to free the intercooler It's a bugger to get out but a flat bladed screwdriver will help. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.