Jump to content
Do Not Sell My Personal Information


Mondeo Mk 3 Help....


Codymcmc
 Share

Recommended Posts

Hi all, to cut a long story short - ish haha the metal oil dipstick housing tube broke half way, when trying to remove to fit a new one I think it broke again in the block :( so now I have to remove the sump pan etc....

car is a 05 plate mk3 Mondeo estate 2.0 TDCI

So far I have removed al the 8mm and 10mm bolts that are on the sump, but its still solid, am I missing anything or is it just the 8 and 10mm bolts, I know it also uses a sealer paste, I am aware the sump can be quite fragile so don't want to use excessive force, how should I go about it, hammer a small flathead screwdriver in between and twist.

Or, is there a better way to access the hole where the metal dipstick housing goes in/out of the sump

Thanks

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...

Forums


News


Membership