Iphone 4 Ios 5 Update

[8skellerns]

Hi! Just joined this forum, very impressed from what I have seen!!

I have a March 2011 Focus 1.6 Sport with the built in sat nav, voice control, ipod connectivity, bluetooth etc, but have now found that after I upgraded my iPhone 4 from ios 4.3 to ios 5, the bluetooth function has serious issues. The cars display continuously says "Cannot Read Data From BT Audio Device" when using bluetooth streaming. iOS5 was supposed to give me track and album info etc on screen via bluetooth, but now I get that message and the audio plays, but cuts out after 10 mins of playing. Also, the car doesnt show signal strength anymore from my phone, or battery level, and if I use the Y ipod connector to listen to ipod audio instead, the radio gets confused between the ipod usb audio and the bluetooth phone audio when making calls, often with the phone saying it is playing or making a call, but no sound from the car!

Has anyone else had this? Everything worked fine with ios 4.3, admittedly with no track or album info via bluetooth, but now even the plain sound doesnt work correctly!!

Many thanks for any help :)

[mweaver01]

I have exactly the same problem on my 2011 (new shape) with sat nav.

A mate has the same car but without sat nav and his works fine.

Im taking mine to ford tommorow as a couple of times my radio has stopped working eg Voice button wasnt working and USB flash drive couldnt be read from.

I noticed some Fiesta cars are having the same issue and the dealer was able to install a software update FOC.

Mark

[ONETrueSaturday]

I have exactly the same problem on my 2011 (new shape) with sat nav.

A mate has the same car but without sat nav and his works fine.

Im taking mine to ford tommorow as a couple of times my radio has stopped working eg Voice button wasnt working and USB flash drive couldnt be read from.

I noticed some Fiesta cars are having the same issue and the dealer was able to install a software update FOC.

Mark

FOC? I wish mate. Ford just told me there it costs for the download, at a cost of £72 an hour!

But I do know others have got it under warranty, my dealer says its not covered,

[mweaver01]

Hi all,

Dont know if you got this sorted but I have just firmware updated my radio and now I have battery/signal back and now it shows track names while playing over BT!.

Check the downloads section here for latest firmware.

http://www.ford-mobile-connectivity.com/

Ta

Mark

[Wickwick10_1]

I have exactly the same problem on my 2011 (new shape) with sat nav.

A mate has the same car but without sat nav and his works fine.

Im taking mine to ford tommorow as a couple of times my radio has stopped working eg Voice button wasnt working and USB flash drive couldnt be read from.

I noticed some Fiesta cars are having the same issue and the dealer was able to install a software update FOC.

Mark

Chaps I had a 59 plate Fiesta ZS up until 4 weeks ago when I picked up my new Focus - my Fiesta USB some days would not read and at the same time no voice control ? I noticed I used to have this issue mainly first thing on a morning when the car had been sat over night ? I had updates a couple of times but never fixed mine ? It would start to work after about 30mins but very annoying , just would not read ??

[Bartos]

Hi all,

Dont know if you got this sorted but I have just firmware updated my radio and now I have battery/signal back and now it shows track names while playing over BT!.

Check the downloads section here for latest firmware.

http://www.ford-mobile-connectivity.com/

Ta

Mark

I found my way here, downloaded the update to USB and followed the instructions but it wouldn't process.

Did you use USB? Do you know if CD or SD Card is possible?

So far I've tried USB only, I've placed the whole folder and contents in the sticks directory. It's running FAT32 and has nothing else on there and meets the 128MB minimum requirement.

As this didn't work I also tried emptying the folders contents straight on to the stick but still no joy.

Any help would be greatly appreciated

[loftygit]

I found my way here, downloaded the update to USB and followed the instructions but it wouldn't process.

Did you use USB? Do you know if CD or SD Card is possible?

So far I've tried USB only, I've placed the whole folder and contents in the sticks directory. It's running FAT32 and has nothing else on there and meets the 128MB minimum requirement.

As this didn't work I also tried emptying the folders contents straight on to the stick but still no joy.

Any help would be greatly appreciated

Hi,

I too am having problems with the USB update - I get the message "BVC device update failed. Please try again later."

Have you managed to get your working yet or used the SD card?

Cheers.

[Bartos]

Mine was caused as I was using a Mac and I was dragging files to their location. Ya need to extract them, so I jumped on the windows laptop and did that using winzip and hey presto it worked

[mitch84]

I updated my bluetooth audio system last weekend , I used a usb stick formatted to fat32, i also removed anything from the stick by formatting it.

Its a simple case of unzipping the download file into your usb drive.

I just followed instructions giving on the ford link and worked fine , took about 15 minutes and now i can use my official usb ipod cable.

http://www.ford-mobile-connectivity.com/downloadsUpdates