1363 replies to this topic

[Lenny]

Now possible Lenny with the software.
How many Keys do you have if you have 2 already you can program a new fob

thanks mate,
i have one flip key and one standard key both came with the car,
and i have the third key which is a flip that i purchased on ebay 2 years ago for 25euro

so when cut and programmed i will have gotten a ford flip key purchased and fully functional fro 35 euro all in.
thats absolutly fantastic. for wanted 198.76 to supply an additional flip key

[Preee]

Good Bargain Lenny , flip keys are great. The programming guide is in the Focus manual in my sig under Key section if you download it m8

[Lenny]

Good Bargain Lenny , flip keys are great. The programming guide is in the Focus manual in my sig under Key section if you download it m8

excellent thanks mate,

[chris mitchell]

Should be just click link to RS page and then choose 'save file to computer'. Open when done and run.
I have revised it to the English version.

I got it to work

[Richiemac]

thanks mate,
i have one flip key and one standard key both came with the car,
and i have the third key which is a flip that i purchased on ebay 2 years ago for 25euro

so when cut and programmed i will have gotten a ford flip key purchased and fully functional fro 35 euro all in.
thats absolutly fantastic. for wanted 198.76 to supply an additional flip key

Just got my blade cut yesterday, Ebay purchase also, €15 to cut, so now to try it & see if it works.....??

[nmigfer]

Its workiiiiiiing!!!

Thank you all mates!!!

It's workin' like a charm!

You can't imagine how many times i've asked ford dealers and searched web for this solution.

Thanks!

- Auto lock on
- Radio info on (I have a short trip screen (not gps). When radio off info is equal before. With radio on - middle lines fall down and radio/CD info going to middle)
- Shift up on (forgot to test)
- DDS will be next mod
- Eco mode (didn't try yet)

Remembered another question: is it possible to program turn signal louder? It's quite low now.

[Teabags]

Can the ELM programme keyless start like on the ST?

[Psyence]

A bit of a teaser, the first beta of my ELM / OBD software is functioning.

So far it has full access to HEC & GEMs, it will automatically read the VIN number and download the As Built Data for the car.

I'll be expanding the module options in the near future.. If you have any suggestions for additional features please let me know and i'll see what i can include in the software.

[mrmetallica]

A bit of a teaser, the first beta of my ELM / OBD software is functioning.

So far it has full access to HEC & GEMs, it will automatically read the VIN number and download the As Built Data for the car.

I'll be expanding the module options in the near future.. If you have any suggestions for additional features please let me know and i'll see what i can include in the software.

id like to be able to programe new clocks to mine as ive messed mine up a bit

[Teabags]

A bit of a teaser, the first beta of my ELM / OBD software is functioning.

So far it has full access to HEC & GEMs, it will automatically read the VIN number and download the As Built Data for the car.

I'll be expanding the module options in the near future.. If you have any suggestions for additional features please let me know and i'll see what i can include in the software.

Maybe as well as reading the DTC there could be a table in the background which could give a description of what the DTC means?

[Richiemac]

Maybe as well as reading the DTC there could be a table in the background which could give a description of what the DTC means?

Just thinking the same thing myself.........would be a nice addition if possible ?

[mrmetallica]

A bit of a teaser, the first beta of my ELM / OBD software is functioning.

So far it has full access to HEC & GEMs, it will automatically read the VIN number and download the As Built Data for the car.

I'll be expanding the module options in the near future.. If you have any suggestions for additional features please let me know and i'll see what i can include in the software.

when can we get our hands on it ?

[Paul-S]

Psyence, programs looking good, any idea of a release date?

Cheers
Paul-S

[Psyence]

I have a little more testing to do, but all things being well i post the first version at the weekend.

I was already planning to receive & decode the DTC's so im glad to hear that is a useful feature for other people.

Please keep any further ideas coming, and i'll see what is possible to implement.

[tapiiri]

Would it be possible to disable EGR from PCM? I hate how it makes tdci engines to judder at low revs.