bogaboo Posted August 5, 2019 Share Posted August 5, 2019 Hello, everyone. I have cleaned mecatronic unit of powershift gearbox, because solenoids was dirty. And then i have mounted it back . Then turn on ignition and saw that in dashpanel there is no any symbol of gear position like PRND. Then i connect forscan and see that my powershift box has some errors, one of errors is u0101 lost communication with transmission control module. I need to get pigtail pinout diagram, i want to check is if all wires in pigtail all ok. Ford galaxy 2010 2,0 TDCI Quote Link to comment Share on other sites More sharing options...
rbitton782 Posted August 5, 2019 Share Posted August 5, 2019 GWHi mateSearch at the mondeo forum, someone there make full gearbox repair, you can ask him. Sent from my SM-G950F using Tapatalk Quote Link to comment Share on other sites More sharing options...
bogaboo Posted August 6, 2019 Author Share Posted August 6, 2019 I found it on ford etis, but there is shown that can pins is 6 and 14 and wires is white ant white blue but on my car white and white blue is 2 and 5 pins Quote Link to comment Share on other sites More sharing options...
Modrich Posted July 21, 2020 Share Posted July 21, 2020 Hi bogaboo did you manage to find the issue with your Powershift? I've having exactly he same issue after cleaning the solenoids on my Galaxy. Quote Link to comment Share on other sites More sharing options...
rbitton782 Posted July 21, 2020 Share Posted July 21, 2020 GWI have this diagram... It's looks like pins 5 and 2Sent from my SM-G950F using Tapatalk Quote Link to comment Share on other sites More sharing options...
Modrich Posted July 25, 2020 Share Posted July 25, 2020 Hi rotem do you have a link to the original document? It may be very useful. I managed to fix my issue, I had put the mechatronics back with the gearbox in the wrong gear...all sorted now Quote Link to comment Share on other sites More sharing options...
rbitton782 Posted July 25, 2020 Share Posted July 25, 2020 GWHi mateI can transfer it via WhatsApp or Telegram.Its 15 MB file whatever you want to know about DCT450. Sent from my SM-G950F using Tapatalk Quote Link to comment Share on other sites More sharing options...
Suliko Posted May 1, 2022 Share Posted May 1, 2022 Hi everyone please help me I have ford s max 2.0 tdci with powershift and I changed it to manual gearbox now my car engine doesn't start. Help me with the electric part 1 Quote Link to comment Share on other sites More sharing options...
KubaN Posted June 18, 2023 Share Posted June 18, 2023 hi, i have the same problem after powershift repair. Do I have to take out the mechatronics and set it in a specific position? Is it enough to start the ignition in R, N or D gear and the controller will communicate? Quote Link to comment Share on other sites More sharing options...
unofix Posted June 18, 2023 Share Posted June 18, 2023 On 4/2/2023 at 8:42 PM, unofix said: Most problems to do with the TCM seem to be to do with the wiring to the connectors of the unit. The harnesses are stupidly short and constantly tug and pull at the connection to the TCM. This leads to cables rubbing in the harness and shorting together or even snapping. You need to disconnect the plugs from the TCM and remove the backshells to inspect the wires for damage and/or corrosion. Whatever is discovered and repaired or replaced the gearbox will need to be put in to the calibration and drum relearn mode using FORScan. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.