Hi all,

Just got myself a little Fiesta mk6 Zetec-s in mint condition.

Don't pick it up until the 16th February though but here's hoping I enjoy it!

Cheers!

Hi and Welcome to the forums , when you get chance upload some pictures :)

Shall upload them when I pick it up.

Wanting to do it up a tad.

Any feedback on some good mods?

Alloys, Lockwood dial kit, body kit, DMB gel badge overlays? :) theres loads you can do the mk 6's still in the process of doing mine up at the moment. Welcome to the forum

Hi welcome :)

Welcome to the Forum

We at the Mod team just want to say thank you for joining and we hope you enjoy reading and posting throughout the forums

FordPartsMan

Welcome to the club mate and enjoy the fizz

Welcome along

Welcome to the Forum Mate.

Welcome along!

Would upload the pics the garage have sent me but can't find an upload button..?

welcome bud, very nice like them in black best colour if you ask me.

Nice car....love the Zetec S and black....my favourite colour :)

Thanks!

I'd easily swap for the ST haha

Was originally going for a red ST but insurance wasn't having any of it :(

Shall upload them when I pick it up.

Wanting to do it up a tad.

Any feedback on some good mods?

Welcome to the forum Chaz,

Only two more sleeps before you turn the key in your new motor,

When you get a moment join photobucket and upload some images of your motor, You can then edit to remove your reg plate etc. Then copy the .img code from each image uploaded and paste it on to a post in the forum or many forums for the image to display. You may also like to log on to DMB Graphics for some Gel badge overlays to fit over your existing blue ford badges or vintage ford decals:

http://www.dmb.uk.com/cat/22/ford-badges-gel-overlays

You may also like to browse my list guides all linked below this post, most of the guides are available in PDF format to download and print aswell as viewing online, my guides have been performed on a focus but most are 100% compatable on your motor.

Cheers Lenny, Shall get to it.

One problem I have realised since having the car is that my bonnet isn't flush with the car.. It tends to stick up slightly near the grill at one side.

Any ideas as to what this problem could be?

I have looked at it and can't see anything.

Cheers Lenny, Shall get to it.

One problem I have realised since having the car is that my bonnet isn't flush with the car.. It tends to stick up slightly near the grill at one side.

Any ideas as to what this problem could be?

I have looked at it and can't see anything.

Strange one there mate,

Is it a gradual lift across the bonnet

Or

Is the bonnet flush all the way across then bent upwards,

If you get the time, perhaps take some bonnet level pictures and upload,

I.e. kneel down and take pictures of the level view across the front end and from the sides.

May have been some minor front end damage or a buckled bonnet hinge causing that side to rise a bit.

It's flush at one side and over past the badge then it seems to raised but I can't see any damage. Just won't click down or however it should.

Shall nip out later if there is somewhere well lit that I can get a good picture.

Cheers.