Once the wet weather has passed that will be my next thing to do.

Get yourself an MK3 Focus badge for the rear. My personal feeling but I think bare looks bland. But looking good otherwise :D

Started working on the black at the front of car this week with fog surrounds in paint

And the rings to moondust silver instead of the chrome

And hope to get back on car today before the work of the main girls

Sent from my iPhone using Ford OC

Fog surrounds all fitted back in now with the silver rings

And also did a bit of colour coding user the bonnet

Sent from my iPhone using Ford OC

Some idiot has stolen my fog light surrounds over night

Sent from my iPhone using Ford OC

looking good.

sorry to hear that your fog surrounds have been stolen some people just cant leave things alone

I had a similar issue when I sprayed up my fiesta parts before.

Sent from my iPhone using Ford OC

Sent from my iPhone using Ford OC

Been awhile since I updated on my car.

Replaced the stolen parts and sprayed back up in black.

Installed a detachable tow bar, now looking at what to do with rear bumper.

The latest install is a autodab installation to the factory fitted satnav

Sent from my iPad using Ford OC

Looking at respraying the black plastics for a high gloss black.

Also looking at spraying the lower section of my standard bumper

And looking at making a set of 4 fins similar to these

As I can't put a Zetec S or ST bumper with my current towbar

Sent from my iPhone using Ford OC

I've been thinking of doing a similar thing with my rear bumper.....let us know how you get on. :)

liking the sound of the plan on the rear bumper as said please let us know how you get on with it

Plan to make some mock ups in cardboard before continuing, need to work out sizing and thickness.

Plan to spray all the rear bumper bits at same time, so not sure how soon the colour will appear

Sent from my iPhone using Ford OC

My only question, what is best thing to make fins from?

Sent from my iPhone using Ford OC

That's why I haven't started mine yet, couldn't decide on thickness, depth, how many, or what to make them from lol

I'm looking about 10-12mm and 70-80mm squares with 4 across the bumper to allow for my towbar I have installed

Sent from my iPhone using Ford OC

Have you thought of one of these and getting it modified?-

http://pages.ebay.com/motors/link/?nav=item.view&id=320993702809&alt=web

I was taking ideas from my mk6 fiesta and this http://pages.ebay.com/link/?nav=item.view&alt=web&id=191313595142

Sent from my iPhone using Ford OC

Been awhile since doing anything on the Focus, but now have a few things being worked on.

1- EGR valve blanking as well as a well due service (hoping wishing the next week or 2)

2 - Working on a slightly different rear valance to fit on, especially as I already have a detachable towbar fitted. Looking at modding a Zetec S valance, removing the bits between the 'fins' and shortening the middle 1 or finding a good material to cut 4 fins

3 - grills, rear valance and b pillars to be resprayed

Sent from my iPad using Ford OC

Blanked of EGR valve successfully after a friend fitted the blank in the wrong way lol

Also started wrapping my interior with silver carbon as the stereo surround and bits are all scratched up

Sent from my iPhone using Ford OC

Liking that silver carbon mate. :D

liking the silver carbon fibre.

was it hard to undo the stereo surround? as I wraped mine with it all still attached

No just used a trim tool to pop it off. Switch surround was then to torx bolts

Sent from my iPhone using Ford OC

ok cheers fella.

can I ask where you got the trim toll from please?

Mine was from a local Snap On rep, but otherwise cheap to buy from Amazon, eBay etc...

Sent from my iPad using Ford OC