roper993 Posted September 2, 2014 Share Posted September 2, 2014 I have installed some hid's into my fiesta and on the drivers side light , it keeps going. Off after a while , then switch them off to cool down then they work. I think the problem lies where my battery for them is aced as it's down the side of my engine coolant (see pic) Does anyone know a better place for them to go or if the heat even has anything to do with them ? Also I got some brackets(see pic) withy light a, does anyone know what they are for ? Sent from my iPhone using Ford OC Quote Link to comment Share on other sites More sharing options...
MarksST Posted September 2, 2014 Share Posted September 2, 2014 Is there enough spare cabling to get them under the headlights? Plenty of space and cooler air there. Quote Link to comment Share on other sites More sharing options...
roper993 Posted September 2, 2014 Author Share Posted September 2, 2014 I'm not too sure , will have to have a look , thanks. Do you reckon they are overheating causing them to turn off , all the wiring seems fine ? Sent from my iPhone using Ford OC Quote Link to comment Share on other sites More sharing options...
MarksST Posted September 2, 2014 Share Posted September 2, 2014 It's possible, that's one of the warmest places you have fitted them in. Do they turn back on straight away or do you have to leave them a few minutes. If you have to leave them a while then it is more than likely heat related. Quote Link to comment Share on other sites More sharing options...
Willy Posted September 2, 2014 Share Posted September 2, 2014 I stuck mine with foam tape under the headlamp 1 Quote Link to comment Share on other sites More sharing options...
roper993 Posted September 2, 2014 Author Share Posted September 2, 2014 If I turn them off and back on they stay on for like a second then go off but if I leave it for like 10 mins they work for a while without problem ! Sent from my iPhone using Ford OC Quote Link to comment Share on other sites More sharing options...
MarksST Posted September 2, 2014 Share Posted September 2, 2014 In that case I do what willy has done above and hopefully it will be ok. 1 Quote Link to comment Share on other sites More sharing options...
roper993 Posted September 2, 2014 Author Share Posted September 2, 2014 Thanks , do you know what those metal brackets are for in my pic ? Sent from my iPhone using Ford OC Quote Link to comment Share on other sites More sharing options...
MarksST Posted September 2, 2014 Share Posted September 2, 2014 Thanks , do you know what those metal brackets are for in my pic ? Sent from my iPhone using Ford OC Not sure, do any holes line up with holes in the ballasts? They could be mounting brackets for them. Quote Link to comment Share on other sites More sharing options...
bensambrook Posted September 2, 2014 Share Posted September 2, 2014 Was it a cheap HID Kit from eBay? Quote Link to comment Share on other sites More sharing options...
roper993 Posted September 2, 2014 Author Share Posted September 2, 2014 These ones... Sent from my iPhone using Ford OC Quote Link to comment Share on other sites More sharing options...
roper993 Posted September 2, 2014 Author Share Posted September 2, 2014 I have fixed the battery under my light and it seems to be working fine, fingers crossed! Sent from my iPhone using Ford OC 1 Quote Link to comment Share on other sites More sharing options...
roper993 Posted September 2, 2014 Author Share Posted September 2, 2014 That didn't last long ! Gone out again , but quick on/off of lights and they are back on ?? Any thoughts? Sent from my iPhone using Ford OC Quote Link to comment Share on other sites More sharing options...
Willy Posted September 2, 2014 Share Posted September 2, 2014 Sounds like a new kit is need mate Quote Link to comment Share on other sites More sharing options...
Philf1 Posted September 2, 2014 Share Posted September 2, 2014 I had 55w HIDs in my mk7 ZS and they were fine put them in the MK 7.5 ST and no joy just flickered on and off constantly then went out. Put in 35w terminator canbus ones from HIDs direct and all is good. I think it is just the 55w that might be your problem probably can't cope with them for some reason. My ballasts are in a similar place to yours and I never have a problem. Sent from my iPhone using Ford OC mobile app 1 Quote Link to comment Share on other sites More sharing options...
Paramanic Posted September 2, 2014 Share Posted September 2, 2014 Where Did you get yours Willy? Quote Link to comment Share on other sites More sharing options...
roper993 Posted September 2, 2014 Author Share Posted September 2, 2014 I think there might be a loose connection, seems to go off on a bump, but like once every like 30/40 mins kinda , sometimes never Sent from my iPhone using Ford OC Quote Link to comment Share on other sites More sharing options...
Willy Posted September 2, 2014 Share Posted September 2, 2014 Hids Direct. Went for the OEM look so 35W 4300k kit. http://www.hids-direct.co.uk/h7-canbus-pro-hid-xenon-conversion-35w-kit/ Quote Link to comment Share on other sites More sharing options...
Philf1 Posted September 2, 2014 Share Posted September 2, 2014 I think there might be a loose connection, seems to go off on a bump, but like once every like 30/40 mins kinda , sometimes never Sent from my iPhone using Ford OC That could be it my daughter had same problem on hers. Check the joints see if any of the connectors are getting pushed out of line Sent from my iPhone using Ford OC mobile app Quote Link to comment Share on other sites More sharing options...
Paramanic Posted September 3, 2014 Share Posted September 3, 2014 Hids Direct. Went for the OEM look so 35W 4300k kit. http://www.hids-direct.co.uk/h7-canbus-pro-hid-xenon-conversion-35w-kit/ Got any pics? N does it pass mot? Quote Link to comment Share on other sites More sharing options...
Willy Posted September 3, 2014 Share Posted September 3, 2014 New car so no MOT till 2016 ;) Here's some piccys. Quote Link to comment Share on other sites More sharing options...
Paramanic Posted September 3, 2014 Share Posted September 3, 2014 New car so no MOT till 2016 ;) Here's some piccys. wow that does look great! do you take it out on service etc? and easy to install? looks mint mate and easy to take back out if need be ? Quote Link to comment Share on other sites More sharing options...
Paramanic Posted September 3, 2014 Share Posted September 3, 2014 also see you de tango-ed ur car too :P looks alot better (silvervision?) Quote Link to comment Share on other sites More sharing options...
Willy Posted September 3, 2014 Share Posted September 3, 2014 I don't take them out as only the MOT people are interested in your lights. Many not even take them out for the MOT to see if it passes or not ;) Silver Vision for the indicators and Night Breakers for the main beam H1s, not changed the fog lamps as I don't use them much. Quote Link to comment Share on other sites More sharing options...
anya00tan Posted September 3, 2014 Share Posted September 3, 2014 I have the same HIDs as Willys. Bought from HID direct. A bit pricey but thats what u pay for quality. Also hid the ballast under the headlights with a good quality double sided tape for a clean look. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.