Remove Side Mirror Glass Mk2.5 Focus
Posted 23 March 2012 - 11:47 AM
I need to replace the side mirror body, because the edge was damaged.......but the glass remained intack.
How do I remove the glass from the old body without breaking it........so I can put it in my replacement body ( which apparently is supplied sans glass )
Is there a recommended method of doing this ?
Have something to contribute?
Sign in or register to start a topic...
Posted 23 March 2012 - 04:44 PM
Haynes manual states
Remove trim on inside by where the tweeter is , undo the retaining , then starting at the top , pull the exterior mirror trim panel fromt he door , disconnect the wiring plug
Unscrew the mirror mounting bolts , then release the clip and withdraw the mirror.
mirror glass , pull the outer edge of the glass rearwards and inser a flat screw driver and gently prise the glass from the place and unclip the mirror and then remove the wiring from the mirror glass.
hope this helps
Not what you're looking for?
Register now, we have a huge community of enthusiasts to answer any questions you might have
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users