adamr100 Posted March 17, 2013 Share Posted March 17, 2013 Hi. My car was broken into the other night and in the process the trim on the left side of the drivers door was damaged, I have searched for some time trying to find part numbers etc and fitting instructions but to no avail. I wondered if someone could point me in the right direction in terms of part number/where I can source it cheaply, and fitting instructions, thanks in advance. Adam Quote Link to comment Share on other sites More sharing options...
DanGersFord Posted March 17, 2013 Share Posted March 17, 2013 Fill in the parts request section on this site and they should be able to source the parts for you or atleast get you the numbers http://www.fordpartsuk.com/ Quote Link to comment Share on other sites More sharing options...
adamr100 Posted March 17, 2013 Author Share Posted March 17, 2013 They only have the left side, http://www.fordpartsuk.com/shop/ford_fiesta_2008_left_hand_front_verticle_window_frame_moulding_3dr_f_1546832.htm is this common ie them only listing one side but they stock both do you know/had any experience of them? Its very odd they would only stock one side. Quote Link to comment Share on other sites More sharing options...
DanGersFord Posted March 17, 2013 Share Posted March 17, 2013 https://www.fordpartsuk.com/partsrequest.htm Click that link and fill in that section and tell them theyve got the left side listed but you need the right hand side and they should be able to get it for you. They're normally quite good at finding bits for you if they havent got it listed on the actual site itself Quote Link to comment Share on other sites More sharing options...
adamr100 Posted March 17, 2013 Author Share Posted March 17, 2013 That's great thank you, i don't suppose you know anything about fitting, are they clipped or glued on? I'm pretty useful, fitted a new window mech last week. my car was broken into and I'm repairing the resulting damage. Quote Link to comment Share on other sites More sharing options...
DanGersFord Posted March 17, 2013 Share Posted March 17, 2013 im not sure about the mk 7 i know on the mk 6 its just clips that hold them on. One of mine actually fell off when the glue perished on it so i had to replace it. Some folk just have no respect for other peoples property Quote Link to comment Share on other sites More sharing options...
adamr100 Posted March 17, 2013 Author Share Posted March 17, 2013 Great thanks for your reply, hopefully it will just clip straight back on, some people are genuinely unbelievable, thanks again for your help. Quote Link to comment Share on other sites More sharing options...
DanGersFord Posted March 17, 2013 Share Posted March 17, 2013 no problem Quote Link to comment Share on other sites More sharing options...
adamr100 Posted June 2, 2013 Author Share Posted June 2, 2013 Bump. As an update to this, the trim is actually stick on. It requires the removal of the black plastic strip under the window, the seals on the outside of the window, the seal on the inside of the door and then the cover peeled off. There is some slight damage to the actual b pillar itself where I presume the crowbar went in, does anybody have any experience of how I can repair this, I read somewhere about a hammer and scraper to tap it down? Thanks. Adam Quote Link to comment Share on other sites More sharing options...
Robmk7 Posted March 30, 2020 Share Posted March 30, 2020 Hi, I’ve taken mine off to spray but struggling to get them back on. It’s a 3 door and the rear bits just stick on with double sided tape but the doors should clip in but I’m finding this impossible. Any help would much appreciated . Cheers Rob Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.