Reversing And Front Camera Fitted

[chris f]

Finaly decided what way i was going to fit the cameras, some of you may have seen some of my post replies asking about cameras.

I removed the glove box and was unable to see any spare gromets in the bulk head to feed a lead, so i decided to fit the wireless camera to the front and rear. I found a switched feed that was on a plug that was conected to nothing on the bonet catch area ( alarm lead not touched). i found an earth under the N/S head light. I mounted the front camera under the number plate it is cable tied to the lower grille.

The rear is conected to the reversing light and I have picked up an earth in the same area.

I took a feed from the rear cigarette lighter and run this to the tray that is by the drivers door, i secured the screen by the vent clip that was supplied, i ran a cable tie from top to bottom and clipped the vent clip to this. The switch that you can see in the cup holder is to turn the screen on and off as this has got a permenant feed.

I did think like (sorry can't remember name) about cutting the glasses holder but i use this I do not use the tray.

[jeebowhite]

Very nice

[richard150]

good one