Rear ST diffuser on Fiesta Titanium

[Adrian79]

Hi, I have a Fiesta mk7 Titanium facelift and I would like to change the rear diffuser with an ST diffuser ( from the picture) . Will the ST diffuser fit on the Titanium rear bumper? 

[James Hawes]

I've just gone through this with a Sport Fiesta diffuser. In short- no, it wont fit. You'll need an ST bumper fitting.

James

[Adrian79]

5 hours ago, James Hawes said:

I've just gone through this with a Sport Fiesta diffuser. In short- no, it wont fit. You'll need an ST bumper fitting.

James

So I need the whole rear bumper?

[James Hawes]

Depends on how good you are with a drill....you actually only need the two spats (on each corner of the bumper) if you drill out for the tiny slot holes in each, then rivet them back at the bottom (effectively creating an ST/Zetec bumper) then you can fit your diffuser, or most of the variants of it. All that's needed is some careful marking out, and your sorted.

James

[Luke4efc]

You'll have a gaping hole in the bottom right where your exhaust tips stop a foot short of the bumper.