Italiot Posted February 11, 2014 Share Posted February 11, 2014 Hi all I have had my fsuper connected today and have found two dtc error codes but i dont know what they are is there a code list anywhere or has anyone had and resolved these errors codes P11AAFINED DTC p1100 all help will be gratfully apreciated thanks Quote Link to comment Share on other sites More sharing options...
ppeter7 Posted February 11, 2014 Share Posted February 11, 2014 Hi all I have had my fsuper connected today and have found two dtc error codes but i dont know what they are is there a code list anywhere or has anyone had and resolved these errors codes P11AAFINED DTC p1100 all help will be gratfully apreciated thanks http://www.talkford.com/topic/211183-mondeo-20-mk4/ Hopes this helps Quote Link to comment Share on other sites More sharing options...
Italiot Posted February 11, 2014 Author Share Posted February 11, 2014 Thanks that answers the codes for me can anyone tell me where the map sensor and manifold pressure sensor is as I can't see online But with the error codes will they auto clear or do they have to be cleared as this is my first time having to get this info from the car Quote Link to comment Share on other sites More sharing options...
mick85 Posted February 11, 2014 Share Posted February 11, 2014 What engine in ur car any drive ability issues Quote Link to comment Share on other sites More sharing options...
Italiot Posted February 11, 2014 Author Share Posted February 11, 2014 2.0 tdci 140 6speed Quote Link to comment Share on other sites More sharing options...
mick85 Posted February 11, 2014 Share Posted February 11, 2014 Have u had any work done recently is performance down have u got a multimeter Quote Link to comment Share on other sites More sharing options...
Italiot Posted February 11, 2014 Author Share Posted February 11, 2014 The clutch and flywheel was replaced in December I do have meter I have had a issue with acceleration dropping in and put on the motorway about 75mph it performs well all other times Quote Link to comment Share on other sites More sharing options...
Italiot Posted February 12, 2014 Author Share Posted February 12, 2014 Here are some pics can anyone point out the maf and map sensors please I have an idea but not certain Quote Link to comment Share on other sites More sharing options...
wase16ll Posted February 12, 2014 Share Posted February 12, 2014 MAF is the sensor between the air filter box and the air filter trunking, in your 3rd pic, you can see the sensor connector between battery and air filter....dont think you have a MAP on that engine Quote Link to comment Share on other sites More sharing options...
Italiot Posted February 12, 2014 Author Share Posted February 12, 2014 I'm not sure I'm just going by the p11aafined dtc code above identified via talk ford link on second post Also euro car parts show map sensor against my reg Quote Link to comment Share on other sites More sharing options...
wase16ll Posted February 12, 2014 Share Posted February 12, 2014 i'll have a look on the autodata and get back in a mo Quote Link to comment Share on other sites More sharing options...
wase16ll Posted February 12, 2014 Share Posted February 12, 2014 no listing for map, only maf..... had no experience with this code, but wondering if the air flaps in the manifold are playing up...could trigger a maf/map code sure somebody on here have more experience with this issue of air flaps/control arm 1 Quote Link to comment Share on other sites More sharing options...
Italiot Posted February 12, 2014 Author Share Posted February 12, 2014 i have just been looking through the haynes repair book have managed to identify the map sensor and also the maf sensors for the mk4 2.0 tdci have marked on picture red indicates map sensor and yellow indicates maf sensor this is the first time im pulling codes from the car so will the dtc need to be cleared after cleaning or will it clear on its own could you please advise thanks Quote Link to comment Share on other sites More sharing options...
wase16ll Posted February 12, 2014 Share Posted February 12, 2014 that isnt actually a map sensor, but can understand the confusion as it does a similar task to a map...it measures air pressure but is linked to the turbo and/or the manifold air flaps Quote Link to comment Share on other sites More sharing options...
Italiot Posted February 12, 2014 Author Share Posted February 12, 2014 I know the books are not always right so would you say that would be the only sensor which can be classed as map there Quote Link to comment Share on other sites More sharing options...
wase16ll Posted February 13, 2014 Share Posted February 13, 2014 would be the only one that would make any sense, but its not a true map sensor Quote Link to comment Share on other sites More sharing options...
Italiot Posted February 13, 2014 Author Share Posted February 13, 2014 I've stripped the two sensors off an cleaned them the car is going in for the fifth service beginning of March then will be on long run will then will find out if it has worked Does anyone have a list of what parts ford should be replace in the services Quote Link to comment Share on other sites More sharing options...
Italiot Posted February 13, 2014 Author Share Posted February 13, 2014 Can this fsuper be trusted to be correct on mk4 Quote Link to comment Share on other sites More sharing options...
Italiot Posted February 21, 2014 Author Share Posted February 21, 2014 I have looked on the internet and seen these error codes show up a lot and have cleaned the two sensors in question cleared it on formidable and as soon as the car is reved they come straight back codes again are P11AAFINED DTC - PCM SECTION P1100 MASS AIR FLOW SENSOR CIRCUIT INTERMITTENT I can go and buy the sensors and replace them but want to be sure I won't be wasting money on parts not needed has anyone any info weather the errors can be got rid of or not Quote Link to comment Share on other sites More sharing options...
wase16ll Posted February 21, 2014 Share Posted February 21, 2014 couple of voltage checks you can do. turbo boost pressure sensor (one youve ringed in photo/map) 3 wire sensor...plug connected...engine idling terminal 1 (blue and white) and 2 (green and blue)= 5volts terminals 2 and 3 (yellow and green)= 2.3volts engine idling, accelerate briefly terminal 2 and 3 =2.9volts briefly MAF only have a supply test which is terminal 3 (violet and grey) and earth point = battery voltage Quote Link to comment Share on other sites More sharing options...
Andrei90 Posted May 13, 2019 Share Posted May 13, 2019 Hi i have some error on my a/c it's some one to explabe me what its that 77F0 6f09 Quote Link to comment Share on other sites More sharing options...
FatHead1979 Posted May 16, 2019 Share Posted May 16, 2019 On 5/13/2019 at 12:00 PM, Andrei90 said: Hi i have some error on my a/c it's some one to explabe me what its that 77F0 6f09 You really need to start your own thread, your question has nothing to do with the issue the Op for this thread is having. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.