Converting From Hydrulic Power Steering to Electric Power Steering.

[Ryan_Tango]

10 hours ago, TomsFocus said:

The jumpyness isn't my clutch control unfortunately.  Even with the clutch fully up in 1st and 2nd it jerks along rather than rolling smoothly when the engines still cold, seems better warm bit still not perfect.  Had to do an hour of stop start rush hour traffic this morning and it was awful tbh.  The PCM update will cost will cost just over £100 so I'll probably try that.

Maybe the AC faults on these are more common than I thought.  If i can't find the leak, I might replace the condenser in spring and hope for the best, don't need ac atm though.

 

I took my kwik fit before Ford Fair last year and they performed a leak test but said their was no leaks, but obviously something isnt right

[TomsFocus]

53 minutes ago, Ryan_Tango said:

I took my kwik fit before Ford Fair last year and they performed a leak test but said their was no leaks, but obviously something isnt right

It could depend on how long they tested it for.  Mine was left on vacuum test for half an hour and only lost a tiny amount in that time.  If kwik fit only left it on the vac machine for 10-15 minutes it might not have shown a leak tbf.  Plus if yours lasts a few weeks after a regas, the leak could be even smaller than mine.