Jump to content


Photo

S-Max 2.0 Tdci 163 Powershift Transmission Fault


  • Please log in to reply
No replies to this topic

#1 mikeinbrum

mikeinbrum

    Newbie

  • New Member
  • Pip
  • 1 posts
  • Ford Model: S-Max
  • Location: Cambridgeshire

Posted 04 November 2012 - 11:32 AM

Hi folks, I'm hoping to get some ideas as to what caused a strange experience this morning.

On starting the car, the engine fired up straight away but I received 2 messages, the first "Partial transmission function" followed by "ESP off". I put the car into Drive, and noticed that when I pulled off, the revs counter stayed at 0, as did the speedo, and other info such as mpg data failed to register. The powershift also failed to change gear as i accelerated.

I stopped the car, turned the engine off, turned it back on again, and all seemed to have resolved other than the engine fault light which remained on.

Any ideas what might have caused this?

car is a 2012 S-Max 2.0 Tdci 163 powershift with 4,000 miles on the clock.

Cheers

Mike

Have something to contribute?

Sign in or register to start a topic...

Sign up to FOC Premium Membership To Remove These Ads

Not what you're looking for?

Register now, we have a huge community of enthusiasts to answer any questions you might have



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users