Fitting heated and cooled seats to a Mondeo ST TDCI

[M4rkr]

Hello folks. 

Im new here but have been browsing for a while. 

Sorry if this is in the wrong section. 

Okay so I have a Mondeo ST TDCI on a 54 plate but logbook says 2005. 

I’m wanting to fit the full leather, heated and cooled interior from a Ghia X or Titanium X. 

Ive searched google but haven’t can’t seem to find a clear answer on what’s involved. 

Will it be a case of plug and play? Or will I need to make looms and buy relays etc? I don’t mind buying parts if needed but just wanted to get an idea on what’s involved. 

Thanks for any help. 

Mark. 

[Luke4efc]

25 minutes ago, M4rkr said:

Okay so I have a Mondeo ST TDCI on a 54 plate but logbook says 2005. 

Registrations run from March-September and September-March rather than to December in case you didn't know. Your Mondeo must've been registered between 1 Jan 2005 and 31 March to still get the 54 plate.

 

[M4rkr]

1 hour ago, Luke4efc said:

Registrations run from March-September and September-March rather than to December in case you didn't know. Your Mondeo must've been registered between 1 Jan 2005 and 31 March to still get the 54 plate.

 

I didn’t know that! Thanks