Frede_Bach Posted April 13, 2019 Share Posted April 13, 2019 Hi guys i am new here in the site, and I am looking for some help. i am looking into retrofitting the full led headlights on my 2018 st-line my car was bulid 2 weeks after the Led option was available. I have looked around the car, and it has all the connections for the levelling sensors. I have allready tried to mount one headlights. The Drl worked fine, the normal driving light came on, but flashes when the engine is running. But no high beam. I will try to mount the Hcm tomorrow to see if this help Have anybody found anything in forscan regards coding of the headlights? Quote Link to comment Share on other sites More sharing options...
nashdm2 Posted April 14, 2019 Share Posted April 14, 2019 I am sure there was a thread about this recently. Have a search. Quote Link to comment Share on other sites More sharing options...
Frede_Bach Posted April 15, 2019 Author Share Posted April 15, 2019 I know there have been topics about if it is possible. I have searched the interweb for quite some time, and have not found anybody as stupid as me who is trying to make this work. i tried mounting a led headlight and hcm yesterday, but that didn’t change anything. Still no high beam, flashing main beam and indicator hyper flashing. Had a go with forscan but had no drop down menus regarding headlights. I don’t have much experience with forscan so I didn’t play around with the hex codes. i hope to find somebody who is a forscan guru to help me break the code. The Led headlights is the only thing I need for my car to as I want. And I am pretty sure it is possible Quote Link to comment Share on other sites More sharing options...
DG97 Posted April 15, 2019 Share Posted April 15, 2019 In all honesty, I think you are probably one of the very few people that have made some progress with this modification. Many including me have thought about it but due to a general lack of any information, it takes a brave person to have a crack at it given the associated cost and high risk of failure. Have you had to install any self-levelling sensors? Good luck with it either way, would be good to see it work. Quote Link to comment Share on other sites More sharing options...
Frede_Bach Posted April 17, 2019 Author Share Posted April 17, 2019 I have searched all over the internet for about a year, and haven’t found anybody doing this conversion. i am in that lucky situation that my best mate sells parts at a ford dealer, so I can do the conversion relative cheap. But we are being sensible and only order a minimum to se if we can make it work. i haven’t fitted the levelling sensors yet, as that is the “easy” part. My intention is to do it the oem way, but I will first look at this, when the headlights work. Can you have a look under your car, to see if you have the wire for the levelling sensors? It is located by the left rear wheel i have gathered a couple of vins from cars with the led option, and will have to analyse the A’s-built data, and hopefully find the right hex to make it work Quote Link to comment Share on other sites More sharing options...
Frede_Bach Posted April 19, 2019 Author Share Posted April 19, 2019 I have started the process of figuring out what codes need to be change to make the headlights work, and if it is possible. I would greatly appreciate is some of you who were lucky enough to get the led headlights would share your vin. The more data I get, the easier I can figure out if this conversion can be done Quote Link to comment Share on other sites More sharing options...
HateMyHeadlights Posted May 1, 2019 Share Posted May 1, 2019 On 4/19/2019 at 6:26 PM, Frede_Bach said: I have started the process of figuring out what codes need to be change to make the headlights work, and if it is possible. I would greatly appreciate is some of you who were lucky enough to get the led headlights would share your vin. The more data I get, the easier I can figure out if this conversion can be done Hey dude any progress yet? I am really interested in doing this project as well. Quote Link to comment Share on other sites More sharing options...
Frede_Bach Posted May 4, 2019 Author Share Posted May 4, 2019 No sadly no breakthrough yet 😞 I am still gathering vin numbers and matching code to find the right places to make chance.. Have you looked under your car, to see if it have the connector for the levelling sensors? Quote Link to comment Share on other sites More sharing options...
kamilben Posted July 9, 2020 Share Posted July 9, 2020 Hi! Have you managed to make them work? I’m strugling with installing led headlights to Focus mk4. Levelling sensors, hcm and wiring were installed. HCM programmed. I tried many possible configurations with LED equipped VINs. Still no success. I have exact same problems. DRLs are working, low beams flickering when engine on, no high beams... Quote Link to comment Share on other sites More sharing options...
DutchFocus Posted March 1, 2022 Share Posted March 1, 2022 On 5/4/2019 at 9:42 AM, Frede_Bach said: No sadly no breakthrough yet 😞 I am still gathering vin numbers and matching code to find the right places to make chance.. Have you looked under your car, to see if it have the connector for the levelling sensors? Hi! Did you ever found a solution for de matrix led lights? Quote Link to comment Share on other sites More sharing options...
unofix Posted March 1, 2022 Share Posted March 1, 2022 1 hour ago, DutchFocus said: Hi! Did you ever found a solution for de matrix led lights? No, the OP has been driving around in the dark for the last 2 years. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.