oilburner Posted August 7, 2011 Share Posted August 7, 2011 Does anyone know if the one touch up/down function can be switched on for all windows on a EB Titanium. All the switches have the 2 click just only works on the driver door cheers Steve Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted August 8, 2011 Share Posted August 8, 2011 Could be the ECU that needs this switching on, but if it clicks twice, it should set the motor off, dont even think it runs through the ECU though... Do you actually feel it click twice? Quote Link to comment Share on other sites More sharing options...
oilburner Posted August 8, 2011 Author Share Posted August 8, 2011 all four switches click twice but only the driver side works for one touch Quote Link to comment Share on other sites More sharing options...
focus steve77 Posted August 8, 2011 Share Posted August 8, 2011 Heard that you have to change the relay behind the door panel that controls the window motor, to the same as the drivers as thats what controls 1 touch so all other doors have to have the same relay..... not looked into it enough myself yet though.... Quote Link to comment Share on other sites More sharing options...
oilburner Posted August 10, 2011 Author Share Posted August 10, 2011 is there any way of getting a wiring diagram for the car - that should have the answer Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted August 12, 2011 Share Posted August 12, 2011 You could find one on google, some people on here have found specific wiring diagrams but not sure I have seen a full car one :( Quote Link to comment Share on other sites More sharing options...
jocojohn Posted August 14, 2011 Share Posted August 14, 2011 Hi, you may have found your answer now but I've just had the same problem on a 2002 Focus after disconnecting the battery.. The windows need to be 're-taught', you need to go round each window in turn and hold the 'up' side of the button (2nd click) until the window is all the way up, then press and hold 'up' again 3 times, for around a second each, repeat for each window. If one-touch down does not work, repeat, but in the 'down' direction Hope this helps Quote Link to comment Share on other sites More sharing options...
cuke Posted August 14, 2011 Share Posted August 14, 2011 Hi, it isn't quite the same process to program the windows on the 2011 Focus as the previous models: 1. Lift and hold the switch until the window is fully closed. 2. Release the switch. 3. Lift the switch again for one more second. 4. Push and hold the switch until the window is fully open. 5. Release the switch. 6. Lift and hold the switch until the window is fully closed. 7. Open the window and try to close it automatically. 8. Reset and repeat procedure if the window does not close automatically. Chris 1 Quote Link to comment Share on other sites More sharing options...
oilburner Posted August 28, 2011 Author Share Posted August 28, 2011 Chris just picked up your reply up. all windows now programed and work on one touch and global open/close many thanks much appreciated Quote Link to comment Share on other sites More sharing options...
tomo2001 Posted September 4, 2011 Share Posted September 4, 2011 Chris just picked up your reply up. all windows now programed and work on one touch and global open/close many thanks much appreciated Can anyone check this with engine running vs switched off. Just programmed mine as previously one touch worked with engine switched off but didn't work with engine running (had to hold switches). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.