'V' Posted June 29, 2014 Share Posted June 29, 2014 Car has just failed its mot due to the ABS dash light not coming on at all!! I've searched lots of threads, forums, and googled my weekend away trying to find an answer. Did the gauge test and tried illuminating all the LEDs (test 3) and even The ABS led doesnt come on. Any idea what wrong? Ive had the PCB out and cleaned it without success. I'm convinced the led is blown could there be anythig else causing this. Just want to know before I get bit with a very expensive repair!!!!! Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted June 29, 2014 Share Posted June 29, 2014 http://www.clusterrepairsuk.co.uk/repair/make/ford?utm_source=google&utm_medium=cpc&utm_term=ford%20focus%20dash%20repair&utm_content=Ford&utm_campaign=CRManufacturerKeywords Sent from my SM-G900F using Ford OC mobile app Quote Link to comment Share on other sites More sharing options...
'V' Posted June 29, 2014 Author Share Posted June 29, 2014 Thanks for the reply and I've seen this company. However, if it's just the led that's blown I can get that fixed for less than £10 Not sure if the instrument cluster is broken or something else, hence me posting. I might give this company a call in the morning Cheers v Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted June 29, 2014 Share Posted June 29, 2014 is it only the ABS? Although you had it out to clean it, did you check for a piece of black electric tape over the front of the bulb? its unlikely to be there, but its so sneaky it can easily fit in there and be overlooked! Quote Link to comment Share on other sites More sharing options...
'V' Posted June 29, 2014 Author Share Posted June 29, 2014 Yeah looks like it's just the abs. Would there be any others that are likely to go with it? Didn't see any tape and I'm 99% sure the light used to come on when starting the car (like it should) Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted June 30, 2014 Share Posted June 30, 2014 Sound like the led. If ur any good with solder just change the led and see if it fixes it. If you have a diagnostic tool as well check if you can communicate with the abs module. Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted June 30, 2014 Share Posted June 30, 2014 defo sounds bulby, for a bit of solder and a spare LED its worth trying it! Quote Link to comment Share on other sites More sharing options...
'V' Posted June 30, 2014 Author Share Posted June 30, 2014 Thanks for the responses guys. Really appreciate it. Car is in at the garage today just for a diagnostic (and a little bit of work) so they're going to rest each led and let me know. Fingers crossed!!! Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted June 30, 2014 Share Posted June 30, 2014 looking forward to a good result for you! Quote Link to comment Share on other sites More sharing options...
'V' Posted June 30, 2014 Author Share Posted June 30, 2014 Not looking good guys :( PCB is now with my local friendly repair man. LED seem to show a current when he tested it - fook!!!! I'll up date when I get a definite answer :( Looks like I might be having beans on toast for the rest of the month Quote Link to comment Share on other sites More sharing options...
'V' Posted June 30, 2014 Author Share Posted June 30, 2014 Oh, on a good note, the abs is working just not the light. Diagnostics showed nothing and communicated with the module so that's good news I guess Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted June 30, 2014 Share Posted June 30, 2014 Yh it has to be the led then. Quote Link to comment Share on other sites More sharing options...
'V' Posted June 30, 2014 Author Share Posted June 30, 2014 Yeah, I still think that's the problem but why would the guys test meter show it working (having a current anyway) He's gonna do a proper test later and get them to light up individually. Hopefully and all my fingers and toes are crossed that the led has gone Quote Link to comment Share on other sites More sharing options...
'V' Posted June 30, 2014 Author Share Posted June 30, 2014 Bad news guys. It's something else and now I have no idea what :( Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted June 30, 2014 Share Posted June 30, 2014 Faulty cluster? Quote Link to comment Share on other sites More sharing options...
'V' Posted June 30, 2014 Author Share Posted June 30, 2014 Looking likely. Gonna fone cluster repairs or somewhere tomorrow. Any other suggestions are more than welcome Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted June 30, 2014 Share Posted June 30, 2014 Revtonic is the best. Cheap only £49. Comeple cluster repair and warrenty. If it is the cluster try getting one from the scrappy put it in and do the test. Your car won't start but it should still show the ignition led. Then you will know. Quote Link to comment Share on other sites More sharing options...
'V' Posted June 30, 2014 Author Share Posted June 30, 2014 Is that the place in Bradford? I'll give them a call tomorrow. If it's the right place they only mention one type of cluster manufacture - visteon??? Does that mean they only fix those? If it's £49 for it to be fixed I'll be over the moon!!!!! Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted June 30, 2014 Share Posted June 30, 2014 Most of Ford clusters are made by them. Go onto there website and see if you can find your cluster. And they are in Bradford. Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted July 1, 2014 Share Posted July 1, 2014 to be honest all they will do is desolder and resolder the connections, if your competent with a soldering iron you could try yourself? Quote Link to comment Share on other sites More sharing options...
'V' Posted July 1, 2014 Author Share Posted July 1, 2014 Good news - sort of! Got the board back from my sparky today. He didn't do anythig other than test the LEDs )all working) So I just plugged it all back together and started the car Abs light comes on :) and goes off :) Now I have the airbag and seatbelt lights on permenantly - no flashing so no code Bugger! Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted July 1, 2014 Share Posted July 1, 2014 You have a issue with your restraints module/ airbag module. You need to connect a diagnostic to check. Might just have been a cluster glitch. Remove car battery for a bit the try. Quote Link to comment Share on other sites More sharing options...
'V' Posted July 1, 2014 Author Share Posted July 1, 2014 The car was on diagnostics on Friday and it didn't show anything. I'll disconnect the battery for a bit and see what happens Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted July 2, 2014 Share Posted July 2, 2014 sounds like a bad connection on the circuit board, I suspect it will still need repairing. Quote Link to comment Share on other sites More sharing options...
'V' Posted July 2, 2014 Author Share Posted July 2, 2014 Yeah definitely. Hopefully we can get it through the MOT and sort the cluster out after. Fingers crossed! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.