gje2403 Posted November 30, 2014 Share Posted November 30, 2014 Hi all, I was just wandering if anyone knew of any exhaust tips that you can fit onto the stock exhaust system. I'm aware that the exhaust does hang down slightly but I can remember seeing an exhaust tip a while back that accommodates for exhausts that bend down With Christmas coming up and all that jazz it won't be until the new year that I could even think about ordering and fitting the ST rear diffuser and milltek exhaust system Any help would be greatly appreciated :) Thank you!! Quote Link to comment Share on other sites More sharing options...
gje2403 Posted November 30, 2014 Author Share Posted November 30, 2014 would something like this work? Quote Link to comment Share on other sites More sharing options...
gje2403 Posted November 30, 2014 Author Share Posted November 30, 2014 or this one...http://m.ebay.co.uk/itm/151352277426?_mwBanner=1 '> http://m.ebay.co.uk/itm/151352277426?_mwBanner=1 Quote Link to comment Share on other sites More sharing options...
Nathan54771 Posted December 1, 2014 Share Posted December 1, 2014 Neither of them will work, the exhaust isn't pointed straight down. I'd save your money until you can buy the St diffuser. 1 Quote Link to comment Share on other sites More sharing options...
Jeff4155 Posted December 1, 2014 Share Posted December 1, 2014 I think it would look a bit funny, rather do the proper cut out of the rear defuser and have it come out straight like the ST does 1 Quote Link to comment Share on other sites More sharing options...
gje2403 Posted December 2, 2014 Author Share Posted December 2, 2014 I've decided to keep saving and do it properly :) Thanks guys! Quote Link to comment Share on other sites More sharing options...
Nathan54771 Posted December 2, 2014 Share Posted December 2, 2014 Good choice, better to do it properly. Here's a guide incase you've not seen it.... http://www.fordownersclub.com/forums/tutorials/article/233-ford-fiesta-mk75-rear-diffuser-upgrade-st/ 1 Quote Link to comment Share on other sites More sharing options...
troy45 Posted December 2, 2014 Share Posted December 2, 2014 maybe something this style would be more suitable as it doesn't drop down so much - angled tailpipe exits through bottom of the finisher. Example is off a Freelander 2 so would be a bit too big I expect Quote Link to comment Share on other sites More sharing options...
Nathan54771 Posted December 2, 2014 Share Posted December 2, 2014 The above wouldn't work, as stated before the standard exhaust doesn't point straight down, it's angled of too the side and down Quote Link to comment Share on other sites More sharing options...
troy45 Posted December 3, 2014 Share Posted December 3, 2014 The above wouldn't work, as stated before the standard exhaust doesn't point straight down, it's angled of too the side and down No worries, sounds like a hacksaw is needed instead ;) Car tailpipe designs seem to lack much creativity I've found, still looking for something subtle but out of the norm from the bike world which would adapt well and suit mine Quote Link to comment Share on other sites More sharing options...
gje2403 Posted December 3, 2014 Author Share Posted December 3, 2014 Good choice, better to do it properly. Here's a guide incase you've not seen it.... http://www.fordownersclub.com/forums/tutorials/article/233-ford-fiesta-mk75-rear-diffuser-upgrade-st/ cheers for that mate, much appreciated :) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.