Mk3.5 Focus

[midnighttd]

Ive been reading through bits on here since i joined.

 

On my titanium the interior lights are read on the door and roof etc.

Is there anyway to change these as i hate the red.

 

On looking through youtube it shows the option on a titanium X screen menu but i dont have it.

 

Does this forscan or other software do it?

 

What exactly do i need to change settings in the sync 2?

 

[goldtail77]

40 minutes ago, midnighttd said:

Ive been reading through bits on here since i joined.

 

On my titanium the interior lights are read on the door and roof etc.

Is there anyway to change these as i hate the red.

 

On looking through youtube it shows the option on a titanium X screen menu but i dont have it.

 

Does this forscan or other software do it?

 

What exactly do i need to change settings in the sync 2?

 

Pretty sure it can't be enabled very easily. I suspect you need additional hardware namely LEDs and switches.

My Mk3 Tit has red in the doors and foot well. While my Mk3.5 TitX has the option, along with a rotary dial by the glasses bin in the roof lining. It adjusts brightness and a button to cycle through colours. My Mondeo TitX Mk5, that I had for 2 weeks was changeable though My Ford Touch.

[alexp999]

Different lighting modules and different controller modules, possibly different looms too. Re programming would be the easy bit.

Easiest way is to re solder different colour LEDs, however when the door is open, rear facing lights must be red, or better still, turn them off and wire your own in.

The colour changing system does this automatically.

[midnighttd]

I presumed the footwell lights, door pocket lights and handle lights were all rbg leds hence changeable. 

 

Albeit the videos are american focus but presumed it would be same as ours.

 

I wasnt sure of the handle in the roof as its only listed up to MK3 models.