Flibbib Posted December 7, 2016 Share Posted December 7, 2016 Hello everyone Thought I'd tag along and share my experience from picking up a stock Ford Focus, to what it is now! It's a PFL Mk2 Focus Sport, Sea Grey Current additions I've made: Engine / Performance Pipercross Viper Closed Cold Air Intake Piper Stainless steel 3" bore cat-back exhaust system Race manifold & decat Potential remap in the new year Only the best sparks / leads / coil pack / oil / fuel and other service parts :) Interior Centre console armrest Sony Double Din aftermarket touchscreen, with steering wheel controls bluetooth hands free Blue accents on heaters and other parts Facelift speedo conversion Ghia / Titanium centre dash storage (FINISHED TODAY! glue is still drying and will be cleaned tomorrow, the pictures look horrible lol) Aux / USB added Tinted rear windows Chrome Heater Knobs Electrical & Exterior Reversing camera (aftermarket, wired to head unit and reverse light feed, activates on reverse as OEM would though) ST Rear Spoiler in black Team Heko Wind Deflectors Pressed metal number plates HID 6000K 55W Dipped Beam HID 6000K 35W Front Fogs Black "S" badge on rear and front grill Full external LED conversion (Brakes, Indicators, Rear Fog & Reverse) 240V (Three pin) Mains Power in Glovebox Hardwired 412GW dashcam Footwell lighting Angel Eyes and Projectors Lightly smoked side indicators, rear clusters and rear fog / reverse Software PCM Update to highest firmware Ford Eco Mode added Instant fuel added HEC Level 2 installed DDS (Tyre Deflation) added ESP (Module and software) added Flip keys added and programmed Radio and Phone display on speedo activated Low washer fluid sensor installed and activated Auto windscreen heaters below 4c I've done a fair few bits, here are some pictures below! Any questions just ask! Quote Link to comment Share on other sites More sharing options...
ScorpionSX Posted December 8, 2016 Share Posted December 8, 2016 Looks very nice! Good job so far! Can I have one question? Can you make a photo of the light beam from the low beams on your headlights? Also, if possible, a daylight picture of the halo rings lit up? Many thanks! Quote Link to comment Share on other sites More sharing options...
Flibbib Posted December 8, 2016 Author Share Posted December 8, 2016 Cheers mate :) Unfortunately the rings are very very weak. I'm yet to find a replacement bulb as they seem to be a first-party cheap chinese one, that close up photo is actually them turned on in the day :( I'll take a picture later of the normal headlights on down a dark country lane, there's loads round here :) 1 Quote Link to comment Share on other sites More sharing options...
dezwez Posted December 8, 2016 Share Posted December 8, 2016 nice job looks good Quote Link to comment Share on other sites More sharing options...
ScorpionSX Posted December 9, 2016 Share Posted December 9, 2016 20 hours ago, Flibbib said: Cheers mate :) Unfortunately the rings are very very weak. I'm yet to find a replacement bulb as they seem to be a first-party cheap chinese one, that close up photo is actually them turned on in the day :( I'll take a picture later of the normal headlights on down a dark country lane, there's loads round here :) That's quite shame. Aren't they just plugged through some resistors or something? (Non electrical guy here, so please excuse my maybe dumb Q)...there should also be some diodes in the upper side of the headlights, two on each side I believe. How bright are they? What type are they? I'm generally curious about the headlights, I finally found someone who actually uses these, I'm thinking about buying maybe an used pair just for fun and tune them up a little...just for shows, meetups and so on... Btw, if I may add some words on upcoming mods, consider adding wheel spacers. 20+20mm in the front, 25+25mm in the back. If you're planning to keep current wheels. Also, some lowering springs. Eibachs are probably most used, quality is great and it with the spacers it REALLY makes a difference on the stance of the car. Looking forward to see the output pics, cheers! Quote Link to comment Share on other sites More sharing options...
Flibbib Posted December 9, 2016 Author Share Posted December 9, 2016 14 minutes ago, ScorpionSX said: That's quite shame. Aren't they just plugged through some resistors or something? (Non electrical guy here, so please excuse my maybe dumb Q)...there should also be some diodes in the upper side of the headlights, two on each side I believe. How bright are they? What type are they? I'm generally curious about the headlights, I finally found someone who actually uses these, I'm thinking about buying maybe an used pair just for fun and tune them up a little...just for shows, meetups and so on... Btw, if I may add some words on upcoming mods, consider adding wheel spacers. 20+20mm in the front, 25+25mm in the back. If you're planning to keep current wheels. Also, some lowering springs. Eibachs are probably most used, quality is great and it with the spacers it REALLY makes a difference on the stance of the car. Looking forward to see the output pics, cheers! Lowering definitely needs to be done I agree, going to look at springs in the new year. Want to get hold of black snowflakes off an ST too as loads of people seem to write them off around here :/ The bulbs are a t-shape, no idea what they are. They're just spliced through a connector block into the sidelight feed, no resistors or anything at all. The bulbs are just crap. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.