Show
Ben... - Panther Black Mk7 Zetec S Tdci
#376
Posted 01 October 2011 - 04:38 PM
could you tell use were you did them and how much if you get it done lol.
#377
Posted 24 October 2011 - 09:20 PM

#378
Posted 24 October 2011 - 09:30 PM

Project Complete
Had planned to get a remap but don't really fancy spending the money now
And if Zetec S leathers with red stitching pop up then I may still purchase those
But that's it now, pretty much done everything I had in mind, is a pleasure to be in and look at
Plan to get a new car early next year
BMW 123d Coupe M Sport
Sapphire Black
Auto
Black Boston Leather
Aluminium Trim
Sat Nav (iDrive)
Xenons
Facelift Lights
Cruise Control
#379
Posted 24 October 2011 - 10:11 PM
#380
Posted 25 October 2011 - 03:25 PM
#381
Posted 08 November 2011 - 07:48 PM
#382
Posted 04 December 2011 - 03:02 PM
You use the same 2 plugs already there
But then you need one of these Spade Connectors and a length of 5 amp wire to connect the red leds to the side lights
Hi Ben, I've got myself the light, the wiring, the spade connector and a cable lock so I'm ready to install to my mk7 but would like a wee bit more info.
How long did it take to get the wire down/up to the side lights and how hard was it to get the a trim off and the light console out to plug it in at the back.
I'm currently reading over your bit and this one... http://www.fordfiest...&fpart=all&vc=1 , looks simple but knowing me I'll have a go and break something or it'll take a whole day!!!
#383
Posted 04 December 2011 - 08:54 PM
Take out the existing light by pushing the tab on the forward side of the light
Put your arm up behind the lower trim (from by the pedals) and reach to the back of the light switch, it has a massive catch on the top and bottom that you need to squeeze and push out the switch
Crimp the spade connector on the length of wire
Push the wire to where the interior light goes from the front of the roof lining by the windscreen
Then make sure you have enough to be able to remove the light in the future
Run the wire across the top of the roof lining by pushing it in
Then remove the rubber door seal on the upright at the front of the car
Run the wire behind the A pillar on the side closest to the car door then tuck it through the gap to behind the light switch
Use a multimeter to find out which wire is for the side lights
Then connect how you wish
#384
Posted 05 December 2011 - 02:41 PM
PS can you not buy an armrest with a type that lifts up behind to stand vertical , hence not in the way of handbrake at all ?
#385
Posted 22 December 2011 - 02:59 PM
#386
Posted 22 December 2011 - 04:56 PM
Armster lifts vertically out of the way.Hi Ben , we have never spoke before but i just want to say i have never seen anyone before on a forum that has put so much effort and time into their car as much as you have , i have not had the time to read all 26 pages ( i think i need glasses lol ) what impressed me was the rear defusor , i think that looks the nuts , however i wonder what the side skirts would look like in the same colour ? I have seen expensive range rovers with different colour bonnets to the rest of the car and looks quite striking. As other forum members have said and quoted good and bad feedback you will recieve , but I am glad to see this has not detered you from carrying on with future mods , you keep going sunshine and if i were you and not already i would open up my own business doing what you love and getting paid for it. Now my eyes have rested i will carry on flicking through this topic , chin up son you done very well indeed
PS can you not buy an armrest with a type that lifts up behind to stand vertical , hence not in the way of handbrake at all ?
#387
Posted 29 February 2012 - 08:10 PM
#388
Posted 29 February 2012 - 08:25 PM
hi there, were did u get the alluminium pedal covers and fiesta fitted mats from? thanks frankie
Try eBay mate
#389
Posted 21 August 2012 - 07:33 PM
#390
Posted 22 August 2012 - 10:59 AM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users






Contributor






