Jump to content
Do Not Sell My Personal Information

Speedo Issues


Hutty89
 Share

Recommended Posts

Hi all,

I've got a mk1 Focus 1.4 (unfortunately), a few months ago I had a issue with my speedo dropping momentarily, which led me to change the speed sensor on the back of the gearbox - pain in the !Removed! job!!

After that I have also replaced the ignition coil and the spark plugs as idle was dropping slightly. The motor has been a good girl for about 5k miles but now have another issue.....

The speedo is stuck on zero, and the trip computer is blanking out, no showing/recording mileage... Surely this can't be the speed sensor as only just been done...

Car runs ok, between gear changes it is a little lumpy, and Idle is slightly higher than usual although not a lot at all...

I have heard something about a oil seal in the final drive/transmutation oil flooding the sensor?

I've been scratching my head for days now and struggling to fix, any input would be much appreciated many thanks...

J

Ps.... It's X reg, 82k on the clock

Sent from my iPhone using Ford OC

Link to comment
Share on other sites


Have the fault codes read from the ECU if the EML is on, this will point you in the right direction.

Usual suspects are VSS, ISCV or instrument cluster.

Link to comment
Share on other sites


Latest Deals

Ford UK Shop for genuine Ford parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...

Forums


News


Membership