Jump to content
Do Not Sell My Personal Information

control arm tightening (at ride height) ?


Recommended Posts

Can anyone confirm if the wishbone front bush (single bolt) is to be tightened without load or whilst vehicle is sitting at ride height? Im under the impression my previous bush has failed drastically and loosened itself in the casing because it was not tightened at ride height, i have just fitted a new wishbone and dont have access to a haynes manual for this vehicle. Many thanks.

Link to comment
Share on other sites

If what you're calling the wishbone is what Haynes refers to as the control arm then it should be tightened with the weight of the car on it.

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...