supercmaxer Posted March 3, 2016 Share Posted March 3, 2016 Evening all, I lowered my cmax over a year ago, i had to change one of the rea suspension arms as I couldnt get the bolts out and had it cut off. I replaced it with a non ford arm and now or since then the n/s rear camber is in more than other side. It been set up correctly using hunter 4 whee alignment twice and its been on another system again all correctly set up and within tolerances. Would the non ford suspension arm be causing the problem? thanks Quote Link to comment Share on other sites More sharing options...
iantt Posted March 3, 2016 Share Posted March 3, 2016 camber is not adjustable, so sounds like the arm is not the same length as the old one. Quote Link to comment Share on other sites More sharing options...
supercmaxer Posted March 6, 2016 Author Share Posted March 6, 2016 arnt the two inner bolts the camber adjusters? Quote Link to comment Share on other sites More sharing options...
iantt Posted March 6, 2016 Share Posted March 6, 2016 nope, they adjust the rear wheel alignment(rear tracking) Quote Link to comment Share on other sites More sharing options...
supercmaxer Posted March 9, 2016 Author Share Posted March 9, 2016 New arm I guess then. Quote Link to comment Share on other sites More sharing options...
iantt Posted March 9, 2016 Share Posted March 9, 2016 sounds like it, can you measure the arm length compared to the other side? Quote Link to comment Share on other sites More sharing options...
supercmaxer Posted March 13, 2016 Author Share Posted March 13, 2016 im sure i can somehow lol Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.d4afe4a42c06168b4e95a6987a44f232.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.