Nick B Posted March 12, 2010 Share Posted March 12, 2010 Hi, My daughter's heater started giving out as much heat as birthday cake candle. After some research and advice concluded it was the heater control valve as inlet pipes were getting hot outlet cold. Changed valve still the same, so suspect either an airlock or heater control knob not activating the valve. Before I take the valve off again to check its operation can anyone advise if my assumptions are correct, and the best way to resolve any problem. Thanks Nick Quote Link to comment Share on other sites More sharing options...
CAR PARTS EXPRESS Posted March 13, 2010 Share Posted March 13, 2010 try back flushing the matrix to see if theres a blockage....remove the 2 pipes, make sure heater selected to hot then get a hose pipe and flush in reverse i.e the pipe thats cold put the hose in that and the wate'should' come out the other pipe on the other side. Quote Link to comment Share on other sites More sharing options...
Ford Own Rs Demons Posted March 20, 2010 Share Posted March 20, 2010 Matrix ditto Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.