andrew43 Posted February 13, 2010 Share Posted February 13, 2010 Had few days off so gave the z-s a detail. degressed arches and lower half then snow foam wheels with naturals wheel cleaner 2 bucket method with megs mit and dodo born to be mild clayed menzerna final finish with planet polish finishing pad werkstat acrylic prime acrylic jet three coats acrylic gloss wheels planet polish seal & shine,glos it tyre gel trim with poorboys trim restorer megs glass cleaner under carridge with chem guys bare bones autoglym metal polish on the exhaust all shuts with acrylic prime My link Quote Link to comment Share on other sites More sharing options...
FMC Posted February 13, 2010 Share Posted February 13, 2010 Looking cool! B) Mind if i add mine? (seeing as the thread title is just FW ZS! ) Megs HyperWash snow foam then 2BM. AG SRP via PC with AG HDW on top (that was last weekend). Today washed and wiped down with AG Aqua Wax. Wheels with Bilberry. Quote Link to comment Share on other sites More sharing options...
andrew43 Posted February 13, 2010 Author Share Posted February 13, 2010 Looking cool! B) Mind if i add mine? (seeing as the thread title is just FW ZS! ) Megs HyperWash snow foam then 2BM. AG SRP via PC with AG HDW on top (that was last weekend). Today washed and wiped down with AG Aqua Wax. Wheels with Bilberry. looking good Quote Link to comment Share on other sites More sharing options...
FMC Posted February 13, 2010 Share Posted February 13, 2010 looking good CHEERS! Forgot to add that it was clayed last weekend before i put the PC over it, using BiltHamber AutoClay :) Quote Link to comment Share on other sites More sharing options...
andrew43 Posted February 13, 2010 Author Share Posted February 13, 2010 CHEERS! Forgot to add that it was clayed last weekend before i put the PC over it, using BiltHamber AutoClay :) i use sonus green clay,ever thought of trying the werkstat acylic kit its great on the frozen white Quote Link to comment Share on other sites More sharing options...
rocky1722 Posted February 14, 2010 Share Posted February 14, 2010 ever thought of trying the werkstat acylic kit its great on the frozen white That's what I use, great stuff. ;) Cars look great Andrew and FMC. B) Quote Link to comment Share on other sites More sharing options...
bILLOO Posted February 14, 2010 Share Posted February 14, 2010 The ZS white looks 'da bomb' when it's clean! :P Quote Link to comment Share on other sites More sharing options...
AndrewL Posted February 14, 2010 Share Posted February 14, 2010 Can I get in on the act...technically mines not a ZS but close enough. My car was stunningly detailed with Halfords tar remover, costco simoniz shampoo and wonder wheels. (Should probably invest in some decent stuff but this seems to work - just a bit more elbow grease required!) Also chaps, all of you cars look stunning (and not because they look like mine!) FMC your plate looks excellent on the car too. :) Quote Link to comment Share on other sites More sharing options...
FMC Posted February 14, 2010 Share Posted February 14, 2010 FMC your plate looks excellent on the car too. :) Thanks Andrew, but my "FMC" plate would look so much better, except the missus won't let me assign it to the Fiesta :( All these FW Fiestas look great - well done all! B) Quote Link to comment Share on other sites More sharing options...
jack Posted February 14, 2010 Share Posted February 14, 2010 Have to agree, NME is a Great plate. Is it just for us old music lovers. My initials are RS. I would love RS 2000 as a plate but I dont think I have enough cash. Quote Link to comment Share on other sites More sharing options...
andrew43 Posted February 14, 2010 Author Share Posted February 14, 2010 Can I get in on the act...technically mines not a ZS but close enough. My car was stunningly detailed with halfords tar remover, costco simoniz shampoo and wonder wheels. (Should probably invest in some decent stuff but this seems to work - just a bit more elbow grease required!) Also chaps, all of you cars look stunning (and not because they look like mine!) FMC your plate looks excellent on the car too. :) looks great good work,i would stay away from wonder wheels on new alloys to acid based get some non acid based like born to mellow by dodo juice Quote Link to comment Share on other sites More sharing options...
S666LER Posted February 15, 2010 Share Posted February 15, 2010 Has yours been lowered????as i am looking into to get the Eibach springs and i noticed on another post you said you had lowered it????Does not look that low? Quote Link to comment Share on other sites More sharing options...
greenymk7 Posted February 15, 2010 Share Posted February 15, 2010 just a quick word about Mellow Yellow dodo wheel cleaner, it may not be acidic but it is alkaline so be careful if anyone is using that also. It is very good though Quote Link to comment Share on other sites More sharing options...
andrew43 Posted February 15, 2010 Author Share Posted February 15, 2010 just a quick word about Mellow Yellow dodo wheel cleaner, it may not be acidic but it is alkaline so be careful if anyone is using that also. It is very good though i have been using turtle wax naturals wheel cleaner its not bad for the price Quote Link to comment Share on other sites More sharing options...
FMC Posted February 15, 2010 Share Posted February 15, 2010 Has yours been lowered????as i am looking into to get the eibach springs and i noticed on another post you said you had lowered it????Does not look that low? Yes mate I've fitted the Eibach Pro Lowering Kit. Camera angle is slightly deceiving becasue of how low i am positioned taking the pic. But you get an idea of how low the rear sits compared to standard. Granted, it isn't LOW, but it is lower and if it was stupidly low i wouldn't have done it lol Handles better too, which was the main motive for me fitting the Eibachs. If you want to go lower, then you'll need some H&R coilovers ;) Quote Link to comment Share on other sites More sharing options...
S666LER Posted February 15, 2010 Share Posted February 15, 2010 Yes mate I've fitted the Eibach Pro Lowering Kit. Camera angle is slightly deceiving becasue of how low i am positioned taking the pic. But you get an idea of how low the rear sits compared to standard. Granted, it isn't LOW, but it is lower and if it was stupidly low i wouldn't have done it lol Handles better too, which was the main motive for me fitting the Eibachs. If you want to go lower, then you'll need some H&R coilovers ;) Nah i am not after silly silly low, just think it needs to be a tad lower to sit perfect. I am going to get some and see what i think to them. Handy to know the handling it improved as well. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.