tlagerman Posted February 17, 2014 Share Posted February 17, 2014 My fan only works on speed 4. I have read that it is prob. caused by a faulty resistor. I have sent for a replacement........but cant find out where it is situated in the vehicle. Can anyone help please. Thanks Quote Link to comment Share on other sites More sharing options...
Dan62 Posted February 17, 2014 Share Posted February 17, 2014 \ Quote Link to comment Share on other sites More sharing options...
The Bear Posted February 17, 2014 Share Posted February 17, 2014 For some reason the Haynes Destruction manual also states you should remove the passenger right-hand trim panel (presumably the one covering the pollen filter). Really can't see why you'd need to remove this as access is gained, as you quite rightly said, from the drivers' centre trim panel. Quote Link to comment Share on other sites More sharing options...
Dan62 Posted February 17, 2014 Share Posted February 17, 2014 \ Quote Link to comment Share on other sites More sharing options...
The Bear Posted February 17, 2014 Share Posted February 17, 2014 Got ya mate, thanks! :) Quote Link to comment Share on other sites More sharing options...
tlagerman Posted February 18, 2014 Author Share Posted February 18, 2014 Thank you for your prompt replies. When the part arrives I will attempt to fit and let you all know how I got on. Many thanks Quote Link to comment Share on other sites More sharing options...
The Bear Posted February 18, 2014 Share Posted February 18, 2014 If you could take some pics and post up that would be great because the ones in the Haynes manual are, well, not very good :) Quote Link to comment Share on other sites More sharing options...
SeanW Posted February 19, 2014 Share Posted February 19, 2014 I did one of these for afriend a few weeks ago...unfortunately my pictures didn't come out so well It's quite awkward to get at. In the drivers footwell, up from the clutch pedal top and in to the centre of the car, it's almost level with it. It will have a large plug on it and should be secured with 2 torx screws. I found using a short extension linkedto a UJ and a long extension meant that I could just nicely reach the screws. Some of the positions I got into to reach were quite amusing...at one point I was head down in the footwell with my feet out the passenger window! Sent from my SM-P600 using Ford OC mobile app Quote Link to comment Share on other sites More sharing options...
iwb70 Posted December 5, 2021 Share Posted December 5, 2021 https://photos.app.goo.gl/X96nAu177yHY5cDNA I did the blower fix today and as said before it's a right pig to get to. It's white plastic fitting with two t20 screws in it and a square grey connector on top. To see it you have to press the clutch pedal in while your head id in the footwell and your feet in the air! Hopefully you can see the photo I've attached. 1 Quote Link to comment Share on other sites More sharing options...
unofix Posted December 5, 2021 Share Posted December 5, 2021 It's a little easier if you just attach the photo to your post. Thank you for the information I'm sure someone will make use of it. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.