Banana Co Posted June 14, 2017 Share Posted June 14, 2017 I've attempted to use chipex this evening as recommended by a forummer but I think i need some more guidance. I have the tri colour system so have an undercoat and a top paint. I put paint one on, dabbed it with my finger and then let it dry for a couple of minutes as per the instructions. I then used the blending solution and wiped it side to side. I then used the second paint and put a blob on and dabbed with my finger again. I left this for 5 minutes. I then used the blending solution. I kept going back and forth but it always seemed to stand out from the paint work. I kept going back and forth with the solution and eventually it just took it all out. Does that mean I haven't given it enough time to dry? Is it possible to leave the drying time for to long? Am i also correct in blending both coats of paint? Any help is appreciated, i really don't want to mess it up Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.