tonydb Posted November 19, 2017 Share Posted November 19, 2017 Hi All, Drove to work this morning and heard the car ding , looked at the display and it read "engine malfunction" , so i pulled over and restarted and all seemed fine , until i put my foot down in second for some speed and noticed the turbo didn't come in , had another 20 ish minutes on my drive in s o i tried it a few more times and as far as i can tell its not kicking in . No ive got on of those code reader units and according to that ive got no codes or no stored codes .Which i found weird as surely the engine malfunction would of stored a code...wouldn't it ?? Its parked up in the multistory now , i cant really try anything till tomorrow , till its light a sim here til 8pm :( .Anyone have any ideas ?. Im wondering if its related to the DPF as i dont really take it on many long journeys , i do normally treat the fuel with one of those wynns things , but havent in the last 3 months , but again if it was blocked wouldnt i have some sort of code or warning light ?? Thanks in advance Quote Link to comment Share on other sites More sharing options...
tonydb Posted November 19, 2017 Author Share Posted November 19, 2017 To add to this , not sure if its relevent. Lately ive been hearing a noise simular to a dump valve , very faintly though. I think it happenes when i change gear , normally hear it the most in third . Quote Link to comment Share on other sites More sharing options...
FatHead1979 Posted November 21, 2017 Share Posted November 21, 2017 DPF or turbo, I would usually expect an issue that is sufficient to trigger the "engine malfunction" warning on the dash would usually trigger a code. Some codes don't stay active but are stored historically, simple code readers i.e. £15 off amazon type readers often only display "active" DTCs. Do you have and ELM327 cable and Forscan (software) or are you using a cheap generic ODB2 reader? Quote Link to comment Share on other sites More sharing options...
tonydb Posted November 26, 2017 Author Share Posted November 26, 2017 Its a cheapo one , but there are 2 sections on the code reading part for live codes and stored codes , both of which are empty. An update to the issue is : it happened again yesterday on the way to football , its like the turbo just turns off , again no codes , restarted twice and nothing. Left it while watching the footie came back to it around 2 hours later and its working again . Id of though tif the turbo is on its way id of got some noise or even smoke from it ? Again surely the dash warning would blink for the dpf ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.