adamd Posted March 13, 2020 Share Posted March 13, 2020 Couldn’t think of a better title! Basically I need the little bit of plastic that fixes the bit under the glove box to it. I had to remove it to replace a fuse and managed to lose the grey plastic plug. Essentially the bit that fits through the hole to fix it to underneath the glovebox. Really bad description so here is a photo of the area I am talking about. Any ideas where to source one? Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted March 13, 2020 Share Posted March 13, 2020 Sent from my SM-G965F using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
Luke4efc Posted March 14, 2020 Share Posted March 14, 2020 On 3/13/2020 at 7:23 PM, Stoney871 said: Sent from my SM-G965F using Tapatalk Carried out a completely professional edit and fixed the arrow for you. Yes I'm bored 😂 2 Quote Link to comment Share on other sites More sharing options...
adamd Posted March 16, 2020 Author Share Posted March 16, 2020 On 3/14/2020 at 11:12 PM, Luke4efc said: Carried out a completely professional edit and fixed the arrow for you. Yes I'm bored 😂 Great thanks. It is a bit blurry but looks like 1310061. What is the word that precedes the number? And where can I source one of these? Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted March 16, 2020 Share Posted March 16, 2020 1310861, the bit before says "finis", it's a ford reference. https://www.ebay.co.uk/itm/272913796872 Sent from my SM-G965F using Tapatalk Quote Link to comment Share on other sites More sharing options...
adamd Posted September 4, 2020 Author Share Posted September 4, 2020 On 3/16/2020 at 5:12 PM, Stoney871 said: 1310861, the bit before says "finis", it's a ford reference. https://www.ebay.co.uk/itm/272913796872 Sent from my SM-G965F using Tapatalk I bought these but they don’t fit, see pictures. Any idea what other part it could be? Quote Link to comment Share on other sites More sharing options...
Monks600 Posted September 4, 2020 Share Posted September 4, 2020 1 hour ago, adamd said: I bought these but they don’t fit, see pictures. Any idea what other part it could be? From the above image further up, looks like you're missing HM4 which is the rivit that goes in to the plastic and then you need the push clip that goes over it. Maybe double sided velcro? be much cheaper and porbably would hold better lol 🙂 Quote Link to comment Share on other sites More sharing options...
adamd Posted September 4, 2020 Author Share Posted September 4, 2020 2 hours ago, Monks600 said: From the above image further up, looks like you're missing HM4 which is the rivit that goes in to the plastic and then you need the push clip that goes over it. Maybe double sided velcro? be much cheaper and porbably would hold better lol 🙂 Ah yes I thought the same shortly after my post, HM4 is missing 🤦🏻♂️ Velcro a good idea but the upside is plastic so won’t work. Will probably just use some strong wire I think! 1 Quote Link to comment Share on other sites More sharing options...
Monks600 Posted September 4, 2020 Share Posted September 4, 2020 Ah yes I thought the same shortly after my post, HM4 is missing [emoji2359] Velcro a good idea but the upside is plastic so won’t work. Will probably just use some strong wire I think!Or, maybe a screw with a washer? Sure just create it’s own thread when ***** in :) Sent from my iPhone using Tapatalk Pro Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted September 4, 2020 Share Posted September 4, 2020 Adhesive magnets?Sent from my SM-G965F using Tapatalk Quote Link to comment Share on other sites More sharing options...
adamd Posted September 8, 2020 Author Share Posted September 8, 2020 On 3/13/2020 at 7:23 PM, Stoney871 said: Sent from my SM-G965F using Tapatalk Where did you get this photo from please? I’d like to have a look and see if I can get the code for part HM4. I may not need it as have done a temporary fix with wire but good to know all the same. Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted September 9, 2020 Share Posted September 9, 2020 It was from Ford Microcat, a program i unfortunately no longer have.Sent from my SM-G965F using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted September 9, 2020 Share Posted September 9, 2020 Found I still have working microcat on an old laptop. The part (Finis) code for the upper bit labelled HM4 is 1310862. Sent from my SM-G965F using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted September 9, 2020 Share Posted September 9, 2020 https://www.ebay.co.uk/itm/293493698358Sent from my SM-G965F using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.