Ford Focus Mk2.5 1.6 TDCI

[NE0]

Hi everyone, just bought a Focus MK2.5 1.6tdci 90 for the right money and want to do a few bits to it. I previously owned an Audi, Honda, BMW so first time ford.

 

 

1. service Items - Is is best to go via ford directly for OEM parts or do Bosch parts?.
2. What do I need?.

   Quote

   Oil Filter Air FIlter Fuel FIler Pollen FIlter Anything else

    

3. What oil is best for the car?
4. I have a oval shape radio and want to change it do a double din any tips
5. I am running 15" non alloys , any suggestions on fittment for annoys and is it worth getting bigger?
6. I want to install reversing sensors or a reversing camera anyone done is suggesfully?
7. Looking as a possible remap & egr off ayone done it for this engine? - https://www.celtictuning.co.uk/component/ctvc/ford/focus-2011-2018/diesel/1-6-tdci-93-bhp-2011-ECU-remap-chiptuning/stage-2?year=2011#t3-content

 

Thanks Guys

[Tizer]

I can't help you with most of the things but it is best to use OEM filters and Castrol Magnatec oil of the correct grade because they make the oil for Ford, although a lot of people use a low ash grade of oil instead and swear that it is better. They may be correct, I don't know.

[F0CUE]

47 minutes ago, NE0 said:

Hi everyone, just bought a Focus MK2.5 1.6tdci 90 for the right money and want to do a few bits to it. I previously owned an Audi, Honda, BMW so first time ford.

 

 

1. Service Items - Is is best to go via ford directly for OEM parts or do bosch parts?.
2. What do I need?.

    

3. What oil is best for the car?
4. I have a oval shape radio and want to change it do a double din any tips
5. I am running 15" non alloys , any suggestions on fittment for annoys and is it worth getting bigger?
6. I want to install reversing sensors or a reversing camera anyone done is suggesfully?
7. Looking as a possible remap & egr off ayone done it for this engine? - https://www.celtictuning.co.uk/component/ctvc/ford/focus-2011-2018/diesel/1-6-tdci-93-bhp-2011-ECU-remap-chiptuning/stage-2?year=2011#t3-content

 

Thanks Guys

 

Welcome to the forum. 

1. Depends on your budget otherwise there is plenty aftermarket parts that are just as good. 

2. Pretty much what you quoted. Check etis for service intervals https://www.etis.ford.com/

Check brakes/fluid and coolant levels. 

3. 5W 30 fully synthetic put your reg into opie oils https://www.opieoils.co.uk/?gclid=Cj0KCQiAjKqABhDLARIsABbJrGkvyPATqjeESIGLEPDfNxYInCc7Nv6Z_uSxnSWY3_We6M4kPwvIcdAaArB9EALw_wcB or eurocarparts 

4. It is double din don't you mean single? If so Halfords sell a conversion to single din that just clips in. 

5. Fitment for alloys is 5x 108 PCD I would say yes looks better with alloys max 17 though or speedo will start go out of sync. 

6. Here is a guide 

7. Plenty have done remaps to these engine reliably. 

 

[NE0]

Thank you so much both, I can see the ford community very warm and welcoming thank you!..