Jump to content
Do Not Sell My Personal Information

Aerosol Painting


emlo68
 Share

Recommended Posts

Hi all,

I have just had to buy a new wing mirror for my Ford Focus Zetec.

The best i could find was one that was primed ready for paint. I then managed to get a Ford Jeans Blue aerosol and Lacquer.

Having never aerosol painted before I am feeling a bit dubious about doing it because of potential drips etc.

Would you class this as a relatively easy job and has anybody any tips.

Many thanks in advance !

Link to comment
Share on other sites


hi it is quite an easy job i would advise shaking it for a good min or two and apply layer by layer till your happy dont hold to close hold about 5 inches away or it will run and laquer is clear anyway so just trying to rember where u sprayed and thats about it. :)

Link to comment
Share on other sites

hi it is quite an easy job i would advise shaking it for a good min or two and apply layer by layer till your happy dont hold to close hold about 5 inches away or it will run and laquer is clear anyway so just trying to rember where u sprayed and thats about it. :)

Thanks for the reply Titch.

How long do you give between each coat and how long between last coat and putting the laquer on.

Thanks !!

Link to comment
Share on other sites

i would give it till its about touch dry or could wait a couple hours for it to properly then go over it with a bit 1500 sand paper then do another coat for a really good finish and then leave it for another couple hours then apply the laquer then leave overnight

Link to comment
Share on other sites

Latest Deals

Ford UK Shop for genuine Ford parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...

Forums


News


Membership