b1g_dav3 Posted April 22, 2013 Share Posted April 22, 2013 Howdy folks, well I was bored and decided to snap a few daytime shots of the new car, not particularly the best as the good camera is currently out of commission >.< I decided to put them up because not everyone has seen the car's yet too much and are on the fence about them, so thought it'd be a good plan to get them up. Feel free to post any pictures of your own, ask any questions and so on! The car is beautiful to drive, I remember feeling the quality difference between my pre-facelift Zetec S and a Zetec S Focus both with the 1.6 TDCi engine, and now I feel very little difference at all between my Fiesta and the Focus. The steering wheel is much nicer in the hand for starters, and the seats are more fitting, it's quieter in the cabin and bumps seem much more soaked up than in the pre-facelift. Then there's the obvious differences in the interior trim being gloss black than silver which brings it in line with the Focus, and things seem a little more 'up market' than sporty, which some may like and some may not. The Sync currently is a love-hate relationship, it is a step backwards I feel, despite a more premium feel; it's quite slow on the voice control and it restarts playlists every time you enter the car, rather than restarting and takes a while for it to re-read your device and then play (up to 2 minutes being the worst so far), although it no longer turns off when you turn the ignition off. The only weird thing I've found with the driving of the car so far is that it sometimes won't start, and wants you to put your foot on both the brake and clutch. Outside the only fault's I can say, are 2 really crappy areas of paint, which hopefully will be being put right soon, but all in all a good car. 487 miles in, and got 78 left in range, first tank with Tesco fuel :P My car's spec is as follows; 2013 Ford Fiesta Zetec S 1.6 TDCi Red stitching & cloth seats Ford Sync and Emergency Assist Auto headlamps, wipers and dimming rear view mirror City pack (Powerfold mirrors with LED puddle lamps and reversing sensors) Adjustable bootload floor Haven't done much to it really and the car is largely standard, only mods to date are; - 35W HID dipped beams at 6000K - CREE 6000K sidelights - CREE 6000K reversing bulbs - 6000K generic eBay LED's for registration lights - Red footwell lighting - Climair wind deflectors - K&N panel filter - Mist washer jets - Yankee Candle black cherry air freshener :P So, here we go! Quote Link to comment Share on other sites More sharing options...
E5GDM Posted April 22, 2013 Share Posted April 22, 2013 Very nice. Just got to de tango it now. Quote Link to comment Share on other sites More sharing options...
E5GDM Posted April 22, 2013 Share Posted April 22, 2013 Although by the looks of the last photo you have..... Quote Link to comment Share on other sites More sharing options...
b1g_dav3 Posted April 22, 2013 Author Share Posted April 22, 2013 Nope, haven't removed the amber bulbs :P just the angle of it. I may do it if I get around to it, but never really bothered about pulling out the amber bulbs. I do have a pack of some silver one's lying around though, so may get to it when doing the fog's :P Quote Link to comment Share on other sites More sharing options...
rogerm Posted April 22, 2013 Share Posted April 22, 2013 nice motor.what wrong with the paint if you dont mind me asking? Quote Link to comment Share on other sites More sharing options...
b1g_dav3 Posted April 22, 2013 Author Share Posted April 22, 2013 Paint defect on the front lip drivers side, and a lump under the paintwork on the passenger door, like a stone or something. Quote Link to comment Share on other sites More sharing options...
Preee Posted April 22, 2013 Share Posted April 22, 2013 Looks really nice , and i like the red stitching and sides of the seats 1 Quote Link to comment Share on other sites More sharing options...
b1g_dav3 Posted April 22, 2013 Author Share Posted April 22, 2013 The seats were quite a risk when ordering, I wasn't sure if they'd look tacky or not, luckily not :P Free option to anyone wanting a Frozen White, Race Red or Panther Black Zetec S :P Quote Link to comment Share on other sites More sharing options...
JoeyG Posted April 23, 2013 Share Posted April 23, 2013 Looks awesome, them seats look very nice. I have ridden in a Titanium with those alloys and the car is quieter inside and bumps are much better soaked up, but that's me coming from 17" low profile tyres so not sure if it's the car of them alloys and thicker tyres. I am hoping to get the ST by next March, but if I cant afford it I will defiantly get a Zetec S, but stick with petty 1.0L 125BHP :-) Quote Link to comment Share on other sites More sharing options...
b1g_dav3 Posted April 23, 2013 Author Share Posted April 23, 2013 The bumps are definitely more soaked up, and that's from the old 16's as well. The do have different tyres though, the last had Hankook Ventus Prime 2's, whereas these have Continental ContPremiumContact 2's, not sure which are better, but no complaint's so far from the Continental's, and they have more of a lip on them protecting from kerbing than the Hankook's do. Quote Link to comment Share on other sites More sharing options...
bigmunkynutz Posted April 23, 2013 Share Posted April 23, 2013 What's the clip thing on your armrest? Quote Link to comment Share on other sites More sharing options...
b1g_dav3 Posted April 23, 2013 Author Share Posted April 23, 2013 It's for clipping my iPod lead to the trim, I have 2 down the side of the passenger bit too, then the lead goes through the hole on the arm rest and into the arm rest where it lives :P Quote Link to comment Share on other sites More sharing options...
ryanfaye167 Posted April 23, 2013 Share Posted April 23, 2013 whish i got the red seats now looks good with the white paint :( Quote Link to comment Share on other sites More sharing options...
b1g_dav3 Posted April 23, 2013 Author Share Posted April 23, 2013 It was only by chance I noticed them on the online configurator, the dealer didn't know about them because it was a right hunt to find them, and they weren't in the brochure either. Quote Link to comment Share on other sites More sharing options...
MarkyR Posted April 23, 2013 Share Posted April 23, 2013 Really nice car mate. I like that red stitching I must say :) And what are mist washer jets? Quote Link to comment Share on other sites More sharing options...
b1g_dav3 Posted April 23, 2013 Author Share Posted April 23, 2013 Thanks, I was just glad it wasn't too much on the seats :P The mist washer jets are the windscreen washer jets, instead of the one's that squirt 2 streams of water, it puts out an even spray across a fan, much better coverage. They come off the latest Focus and cost a few quid each from the dealers. 1 Quote Link to comment Share on other sites More sharing options...
Willy Posted April 23, 2013 Share Posted April 23, 2013 Looking good Dave :) Quote Link to comment Share on other sites More sharing options...
MarkyR Posted April 23, 2013 Share Posted April 23, 2013 Thanks, I was just glad it wasn't too much on the seats :P The mist washer jets are the windscreen washer jets, instead of the one's that squirt 2 streams of water, it puts out an even spray across a fan, much better coverage. They come off the latest Focus and cost a few quid each from the dealers. Oooh, they sound cool, may see if the ST has them if not may get some. Quote Link to comment Share on other sites More sharing options...
Willy Posted April 23, 2013 Share Posted April 23, 2013 Thanks, I was just glad it wasn't too much on the seats :P The mist washer jets are the windscreen washer jets, instead of the one's that squirt 2 streams of water, it puts out an even spray across a fan, much better coverage. They come off the latest Focus and cost a few quid each from the dealers. worth giving them a coat of white paint too, Done mine with some Halfords paint and straws :D Quote Link to comment Share on other sites More sharing options...
b1g_dav3 Posted April 24, 2013 Author Share Posted April 24, 2013 worth giving them a coat of white paint too, Done mine with some Halfords paint and straws :D How do you keep the jets clean from paint? I was thinking on it, but then again it might end up costing like, £20 just to have them white lol. Quote Link to comment Share on other sites More sharing options...
Willy Posted April 24, 2013 Share Posted April 24, 2013 I used a straw to block the hole before painting. After each coat I moved the straw slightly.It would be cheaper getting someone else to paint them at £20. Quote Link to comment Share on other sites More sharing options...
b1g_dav3 Posted April 24, 2013 Author Share Posted April 24, 2013 I'd need the paint tin and that's it probably. For the washers - prime, paint and clear coat? Quote Link to comment Share on other sites More sharing options...
Willy Posted April 24, 2013 Share Posted April 24, 2013 Yep thats it mate, give it a few hours in a warm place between coats too. Quote Link to comment Share on other sites More sharing options...
b1g_dav3 Posted April 24, 2013 Author Share Posted April 24, 2013 I might consider it, I could actually just mask the nozzle points easy enough, and I suppose they're only £3 to get a piece. Quote Link to comment Share on other sites More sharing options...
Sted Posted April 24, 2013 Share Posted April 24, 2013 Your car looks great! I've just acquired a pre facelift Zetec S in white. Traded in my old ST but am so loving the Mark7 car better. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.