chris liverpool Posted October 13, 2009 Share Posted October 13, 2009 Hi All, Im new to site and Im hoping you can help me find the answer to a problem I have been trawling the net for. I want to replace the cd 6000 unit in my 58 plate focus with a sat nav system off eBay, but have no idea how to get it out. Does the stereo surround fascia just pop off ????? I dont want to force it. Please help this is cracking me up!!! Please post any useful pics or diagrams, I need all the help I can get !!! :-) Thanx Chris Quote Link to comment Share on other sites More sharing options...
mintalkin Posted October 13, 2009 Share Posted October 13, 2009 this may help http://www.fitaudio.com/?View=entry&EntryID=146 Quote Link to comment Share on other sites More sharing options...
chris liverpool Posted October 13, 2009 Author Share Posted October 13, 2009 Thanx for your reply Mintalkin. the cd in my car is the newer type with the big button in the middle and chrome ring around the unit. I have been on that site and cant find anything listed. I will post a picture of my dash as soon as possible. Thanx again for your help. Quote Link to comment Share on other sites More sharing options...
chris liverpool Posted October 13, 2009 Author Share Posted October 13, 2009 my stereo this is the unit I want to remove. The plastic fascia which goes around the heater switches and stereo is what I need to remove I think. But how ?????? Quote Link to comment Share on other sites More sharing options...
dixie Posted October 14, 2009 Share Posted October 14, 2009 my stereothis is the unit I want to remove. The plastic fascia which goes around the heater switches and stereo is what I need to remove I think. But how ?????? Are there any narrow slots around the perimeter of the unit? Quote Link to comment Share on other sites More sharing options...
H3lly Posted October 15, 2009 Share Posted October 15, 2009 Go into halfrauds or your local motor factors and ask for the radio removal keys. All they will need is the model of your focus. They should be flat bladed keys that slot in at each side and the whole unit pulls out. Quote Link to comment Share on other sites More sharing options...
chris liverpool Posted October 15, 2009 Author Share Posted October 15, 2009 problem solved, the fascia ( radio surround ) just pops off to reveal the stereo held in by four screws, one each corner. unscrew and bobs your uncle the stereo is out. When popping the fascia off be very carefull and do it gently, its doesnt come off easily and will bend if you pull it quickly. I used a butter knife at the edge to prize it up, you will here the clips holding it on click open. Start at the sides and slowly work round the dash. BE WARNED TAKE IT SLOW!!! Quote Link to comment Share on other sites More sharing options...
3346davids Posted November 6, 2009 Share Posted November 6, 2009 :D problem solved, the fascia ( radio surround ) just pops off to reveal the stereo held in by four screws, one each corner.unscrew and bobs your uncle the stereo is out. When popping the fascia off be very carefull and do it gently, its doesnt come off easily and will bend if you pull it quickly. I used a butter knife at the edge to prize it up, you will here the clips holding it on click open. Start at the sides and slowly work round the dash. BE WARNED TAKE IT SLOW!!! I have just removed the facia on my 58 plate Focus to fit a phone bracket. I used 2 butter knives so you can hold the facia up with one whilst you work your way round the facia with the other. Worked a treat. Thanks Quote Link to comment Share on other sites More sharing options...
thesilverfox Posted November 11, 2009 Share Posted November 11, 2009 :D I have just removed the facia on my 58 plate Focus to fit a phone bracket. I used 2 butter knives so you can hold the facia up with one whilst you work your way round the facia with the other. Worked a treat. Thanks Are you replacing with an after-market sat-nav, or a Ford unit? If a Ford unit, you might need to change the base of the roof aerial for the GPS receiver. Quote Link to comment Share on other sites More sharing options...
dp63 Posted December 30, 2009 Share Posted December 30, 2009 When you say you remove the fascia, do you mean the smaller plate just around the radio controls or the plate which surrounds the A/C controls and hazard button? Is the wiring on this version of the CD6000 identical to the wiring on the previous version? If not, does anyone have the wiring diagram? Thanks! Quote Link to comment Share on other sites More sharing options...
Lloydd Matthews Posted August 10, 2010 Share Posted August 10, 2010 When you say you remove the fascia, do you mean the smaller plate just around the radio controls or the plate which surrounds the A/C controls and hazard button? Is the wiring on this version of the CD6000 identical to the wiring on the previous version? If not, does anyone have the wiring diagram? Thanks! Hi, Just been reading your conversation, by any chance do you still have that silver fascia plate surround? If you could find it please let me know :) Many thanks, Lloydd (crazylloyddlins@hotmail.co.uk) Quote Link to comment Share on other sites More sharing options...
terlew10 Posted January 17, 2011 Share Posted January 17, 2011 Can you please let me know if you've got access to the Driver's Seat Heater Switch when the radio is removed Thanks Terlew10 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.