Felippe Elias Posted November 27, 2015 Share Posted November 27, 2015 Hi, recently i bought a pair of headlights of the focus titanium mk2 to replace the headlights of my focus sigma mk2. Apparently all the lights are working fine but the light adjustment that you can set inside the car stop working. Maybe because the connector of my car is not powering up the right schema of this new headlight. Does anyone had the same problem ? Quote Link to comment Share on other sites More sharing options...
ScorpionSX Posted November 29, 2015 Share Posted November 29, 2015 I'm not sure which picture belongs to which headlights you're using, but, one of them are probably the standard halogen headlights (probably the ones you're using up to now) and the other ones are an AFS headlights. Still halogen-based, however, they're manufactured to be able to "look" to sides when turning the wheel. You need to have aditional wiring installed in your car to get the turning function properly working, however, even without the full wiring, you should be able to use them properly. If the height adjustment doesn't work, it might be because of broken levelers, or simply the plugs to levelers aren't connected properly...you need to check them a bit more and perhaps provide a better pictures of the insides - of the new lights of course. Take down the plastic cover which covers the bulbs and we might be able to give you more advice. Quote Link to comment Share on other sites More sharing options...
Felippe Elias Posted November 29, 2015 Author Share Posted November 29, 2015 The 7 pin connector is what comes with the car, the 10 pin is of the new headlight. Maybe if i power it up the 3 pins (using the ground) that is missing, it will work ? Quote Link to comment Share on other sites More sharing options...
artscot79 Posted November 29, 2015 Share Posted November 29, 2015 Yeah it would nowhere as was as that I'm afraid some cars have 10 pins some don't I've got the 10 pin and I can tell you the wiring will be a nightmare Quote Link to comment Share on other sites More sharing options...
Felippe Elias Posted November 29, 2015 Author Share Posted November 29, 2015 i bought the 10 pin connector, i gonna change both sides for the 10 pin. The 3 missing pins im gonna ground they. I'm afraid that will not work or break something. Quote Link to comment Share on other sites More sharing options...
artscot79 Posted November 29, 2015 Share Posted November 29, 2015 Without knowing what the pins fo its likely that some of the functions still wont work Quote Link to comment Share on other sites More sharing options...
Felippe Elias Posted November 30, 2015 Author Share Posted November 30, 2015 The first 5 i now what it is (low light, high light, side light , indicators and ground) the last 2 is Motor, and Motor ground Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.