Danesh Posted September 6, 2020 Share Posted September 6, 2020 Hi guys, Does anyone know a ford electrician or sparky?looking for someone to help source a fault with a accelerator pedal. Quote Link to comment Share on other sites More sharing options...
nicam49 Posted September 6, 2020 Share Posted September 6, 2020 Why not just replace it? Quote Link to comment Share on other sites More sharing options...
StephenFord Posted September 6, 2020 Share Posted September 6, 2020 😀 https://lmgtfy.com/?q=auto+electrician%2C+london 1 Quote Link to comment Share on other sites More sharing options...
Danesh Posted September 6, 2020 Author Share Posted September 6, 2020 I’ve replaced the pedal, TPS and throttle body, made no difference Quote Link to comment Share on other sites More sharing options...
MasterTechTip Posted September 6, 2020 Share Posted September 6, 2020 What vehicle is it and what engine? Are you getting any DTC's or warning lights / messages? Quote Link to comment Share on other sites More sharing options...
Danesh Posted September 14, 2020 Author Share Posted September 14, 2020 On 9/6/2020 at 3:42 PM, MasterTechTip said: What vehicle is it and what engine? Are you getting any DTC's or warning lights / messages? im getting the code p2111. there is also a huge misfire at idle, engine shake erratically. i replaced all spark plugs which made no difference to the misfire. I also tried popping each coil out whilst the engine was running, cylinder 1 and 3 did not respond to removing the coils, but Cylinder 2 did respond. So i swapped the coil from 2 to 3, made no difference so im pretty sure the coils are fine. Cylinder 1 and 3 still not responding, could this be linked the pedal? Should i consider looking at a vaccum leak or fuel issue? Quote Link to comment Share on other sites More sharing options...
nicam49 Posted September 14, 2020 Share Posted September 14, 2020 Hi, have you tried clearing the error codes then seeing which one(s) return? Quote Link to comment Share on other sites More sharing options...
stef123 Posted September 14, 2020 Share Posted September 14, 2020 On 9/6/2020 at 12:32 PM, nicam49 said: Why not just replace it? Parts canon lol 1 Quote Link to comment Share on other sites More sharing options...
Danesh Posted September 15, 2020 Author Share Posted September 15, 2020 On 9/14/2020 at 4:50 PM, nicam49 said: Hi, have you tried clearing the error codes then seeing which one(s) return? yh tried that same codes came back. im just skeptical as i ran a compression test on all three cylinders, it read 190psi on the dot for all three. Also the engine has only 18k on it, i'm starting to think its related to wiring or the way the ecu was programmed? The ecu was for the exact same engine and the horsepower, is it possible that the firing order is out or wrong on this ecu? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.