Jump to content
Do Not Sell My Personal Information

"slipping Auto Box" Ford Mondeo Mk3 Jacto Box


lemmon11
 Share

Recommended Posts

HI All

After purchasing a ford mondeo (54 plate) with an 5 speed triptronic automatic box, all dose not seem to be going well. I have trawled through everything about the automatic 5 speed JACTO box on the net but they seem rarer than blue steak, and unfortunitly people knowing how to fix them without saying just put a new box in even rarer.

The problem is as follows.

normal driving seams fine changes up and down without issue. foot down it goes like stink. However travailing at 60mph on the motorway it will be 2K revs (no gear change) slight increase in throttle and the revs will increase to 2.5K (even jammed in 5th so no gear change) and a boot full will instantaneously rise to 3K with a slight audible whistling noise under bonnet. which can get rather annoying.

I have checked the following.

box oil level - ok

bottle of stop slip added - did nothing

checked all wiring and connectors seam ok.

TC stall test 2,300rpm - I have been told this is correct and shows the box and TC is ok

from what I understand the issue seems to be the torque converter is not locking up but cannot find were the solonide is or if its electronic or vacume operated. (no vac pipes go to the gear box) getting rater stuck with this one if anybody has any Ideas i would be great full

Link to comment
Share on other sites


Moved to Mondeo Forum for better propagation.

Link to comment
Share on other sites

Latest Deals

Ford UK Shop for genuine Ford parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...

Forums


News


Membership