AJRTDDI Posted July 19, 2015 Author Share Posted July 19, 2015 Green and yellow on green precat 02 Green and blue on blue pastcat 02 Quote Link to comment Share on other sites More sharing options...
rs moggy Posted July 19, 2015 Share Posted July 19, 2015 10 blue + red and 2 gray + red go to oil presher gages but mite go in to can bus !!! so i av asked big woza on lowcost bilders site for the full info on the OBD port plug ok mate il let you no wen he tels me ok Quote Link to comment Share on other sites More sharing options...
AJRTDDI Posted July 19, 2015 Author Share Posted July 19, 2015 The colors look like canbus colours. Tbh Thats why i was worried. They can be removed then and still use dignostic port? I can retro fit my own guages. Quote Link to comment Share on other sites More sharing options...
AJRTDDI Posted July 19, 2015 Author Share Posted July 19, 2015 Them colors i have for DLC. As u can see the colors are wrong. The think ecu gos into a canbus unit, then diagnostic port is can into the unit. I do have a matching set of wires. But ecu layout says there for pin 6 and 14 Quote Link to comment Share on other sites More sharing options...
AJRTDDI Posted July 19, 2015 Author Share Posted July 19, 2015 Last 2 photos match the loom in colour but locost says ecu pinout is different. Quote Link to comment Share on other sites More sharing options...
rs moggy Posted July 19, 2015 Share Posted July 19, 2015 i no mate lets c wot woza says he will post the 7 wires and c wot is wot and the ones for the ECU is wot u need mate soon as i no il bell u ok mate so get that lump in redy lol and get a rs turbo flue tank and pump but i think the efi will work fine mate Quote Link to comment Share on other sites More sharing options...
AJRTDDI Posted July 19, 2015 Author Share Posted July 19, 2015 Thats all i have left. That thick wire is to the coil. Green. The smaller one is to 02 sensors that im not sure is ground or live ect yet. Yellow Then thats about it. Quote Link to comment Share on other sites More sharing options...
rs moggy Posted July 19, 2015 Share Posted July 19, 2015 ok mate no probs wen its dun we try it on my car and c if it runs wont take long if its all good then is all dun ok mate sound Quote Link to comment Share on other sites More sharing options...
AJRTDDI Posted July 19, 2015 Author Share Posted July 19, 2015 Number 31 and 32 are 02 sensors. Only share pin 1. I think thats not correct. The picture is from normal 2.0 zetec. Quote Link to comment Share on other sites More sharing options...
AJRTDDI Posted July 27, 2015 Author Share Posted July 27, 2015 Loom completed now. Just waiting on a sump and oil pickup 1 Quote Link to comment Share on other sites More sharing options...
AJRTDDI Posted August 6, 2015 Author Share Posted August 6, 2015 Got flywheel done moggy :) 2 Quote Link to comment Share on other sites More sharing options...
AJRTDDI Posted August 11, 2015 Author Share Posted August 11, 2015 Engine out Quote Link to comment Share on other sites More sharing options...
AJRTDDI Posted August 11, 2015 Author Share Posted August 11, 2015 ST170. Also running ST170 manifold and runner unit 2 Quote Link to comment Share on other sites More sharing options...
AJRTDDI Posted August 11, 2015 Author Share Posted August 11, 2015 Ecu and all wiring now in place 3 Quote Link to comment Share on other sites More sharing options...
AJRTDDI Posted September 10, 2015 Author Share Posted September 10, 2015 All up and running done 5.9sec to 60 2 Quote Link to comment Share on other sites More sharing options...
Goodkat Posted September 10, 2015 Share Posted September 10, 2015 That is awesome, gonna be an eye opener for those on the road! 5.9 seconds... Impressive! Sent via the 'Clacks' GNU STP Quote Link to comment Share on other sites More sharing options...
AJRTDDI Posted September 10, 2015 Author Share Posted September 10, 2015 Normal 1.4 carb fuel pickup cut and fitted st170 pump. Quote Link to comment Share on other sites More sharing options...
GingerFlame Posted September 10, 2015 Share Posted September 10, 2015 Just going to hit the subscribe button.... Quote Link to comment Share on other sites More sharing options...
AJRTDDI Posted September 10, 2015 Author Share Posted September 10, 2015 Think ur year late flame lol Quote Link to comment Share on other sites More sharing options...
AJRTDDI Posted September 10, 2015 Author Share Posted September 10, 2015 When my back injury claim is sorted i may share my secret 400bhp 4x4 mk3 project lol 1 Quote Link to comment Share on other sites More sharing options...
GingerFlame Posted September 10, 2015 Share Posted September 10, 2015 I've just read all 10 pages so I'm now up to date! Haha Any further updates shall be a notification for me :) Sent from my HTC One_M8 using Tapatalk Quote Link to comment Share on other sites More sharing options...
AJRTDDI Posted September 15, 2015 Author Share Posted September 15, 2015 New efi tank for a long term fuel fix. 2 Quote Link to comment Share on other sites More sharing options...
AJRTDDI Posted September 24, 2015 Author Share Posted September 24, 2015 New tank and pump is in with st170 pump. 2 Quote Link to comment Share on other sites More sharing options...
AJRTDDI Posted November 30, 2015 Author Share Posted November 30, 2015 I had just finshed some work on it. Sadly my car was Stolen yesturday night Quote Link to comment Share on other sites More sharing options...
GingerFlame Posted November 30, 2015 Share Posted November 30, 2015 Whaaaatt?!?!?!?!?!?!!?! Oh no :( Was it insured at this point?.. The scumbags must have spotted you working on it.. Sent from my HTC One_M8 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.