Jump to content
Do Not Sell My Personal Information

Lambda Sensor??


Dalb
 Share

Recommended Posts

Checked my ecu for any error messages.

Come across this one.

P0030 - powertrain (H02S heater control sensor bank 1 sensor 1)

Bit google searching I've think its lamda sensor.

Just want to know if I'm correct, which sensor is it. Google says there is 2.

How easy is it to change myself.

Link to comment
Share on other sites


Correct , heater circuit of upstream lambda sensor at fault, can be wiring issue or sensor( normally its the sensor)

  • Like 1
Link to comment
Share on other sites

Just changed my lambda sensor only MK3 focus. Be warned its not a cheap part, cost me £197 for a ford one and that was with a trade discount. Fairly easy to do. If you can get an OEM it will work out a fair bit cheaper.

Link to comment
Share on other sites

i usually go scrapyard for parts like this if car is older than 8 yrs or oem but price the part up with fords fist to

get an idea  what prices are

  • Like 1
Link to comment
Share on other sites

Glad to hear you sorted your sensor.

On a ka , a non ford sensor should be £30-70 approx

  • Like 2
Link to comment
Share on other sites


Yea seen a few at eurocarparts about £30+ 

Just need to know where I can locate it on streetka, and how to change it

Link to comment
Share on other sites

Its on the top of the exhaust manifold at the back of the engine.
Only tricky bit is getting the old one out if you dont have the right tool - I just snapped the top off and then used box spanner to get it out!
Just be careful not to drop broken bits down the hole or it could feck the cat!

Delboy is right scrappies are the best bet for old heaps!
I got a new one from eBay for £15 - it can cause nasty fuel consumption problems and hesitation!

 

Link to comment
Share on other sites

@Omendata

Is it arkward to get tto, thinking maybe when I got a day off I will give it go.

Would I be able to access from underneath the car.

Any tips

Link to comment
Share on other sites

from above in engine bay, its clearly visable at rear, just look for the same sensor as shown in the image you posted

  • Like 2
Link to comment
Share on other sites

Located it.

Should be able to replace it from the top using a extension on the spanner.

Ihope.e

Link to comment
Share on other sites

I doubt it - i tried all manner of extensions and spanners , box spanners - eventually had to snap the top off.

Proper tool on eBay or amazon costs a fortune for a half hour job - bear in mind when you get the lambda sensor if it was like mine (check before you buy) and didnt have the circuit end attached you will have to cut - solder (dont crimp or connect) the old wires and the new ones and heatshrink it as bad wiring can be detrimental to the working of the sensor!

Better to buy the full sensor with circuit connector attached - costs a bit more but its worth it if you arent good with a soldering iron!

 

Link to comment
Share on other sites

I brought this socket to possible make it easier to remove.

Once removed then will buy the sensor with the connector.

Screenshot_20160315-235641.png

Link to comment
Share on other sites

Good find the one i saw was £15 but it was an all in one tool.

Should be a tap in (or tap out - pardon the pun) with the right tool!

You will probably only use it once in the lifetime so not a buy for me i already have a garage full of tools and stuff i will never use.
Anyone want to buy a WWII Wermacht Flammenwerfer , Electric Chainsaw, Lotus Excel Eclat or a Dutton Phaeton S3 needing a rebuild lol
Sorry the Opel Manta S isnt for sale she is my baby!
But you can have the Streetka for free - I will even pay you to take it away!

>;o)

Link to comment
Share on other sites


Put in the petrol and I will come and take the streetka

I just want to clarify though the lambda sensor that may need changing is the near the exhaust manifold (see picture) and not the one on top of the engine.

Ho2s Bank1 sensor 1 code p0030

Don't want to change the wrong one.

But if it is this one, that its gona be a mission to takeout from the top, and getting underneath abit of a mission when your big. Any suggestions?

 

IMG_20160316_105012.jpg

Link to comment
Share on other sites

Bank 1 sensor 1 is the one on top of the engine and not the one down below on top of the exhaust manifold.

Link to comment
Share on other sites

Latest Deals

Ford UK Shop for genuine Ford parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...

Forums


News


Membership