Ian Lanc Posted May 4, 2016 Share Posted May 4, 2016 Hi guys, The other week I had a front suspension spring snap on our Fiesta, so my Son set about changing both sides with good quality replacement springs [not upgraded], everything went well and was all marked up so everything went back as it was on re-assembly, the main bolt holes are round and not oval like on some other makes of cars, so the camber should still be spot on, but I still have a niggling thought..... DO I GET THE CAMBER & TRACKING CHECKED ? The car drives in a straight line when I take my hands off the steering wheel. Doesn't pull to the left or right. What you think ? Quote Link to comment Share on other sites More sharing options...
Willy Posted May 4, 2016 Share Posted May 4, 2016 Get it checked anyway. The springs will settle over a few weeks and your tracking may go out slightly. 1 Quote Link to comment Share on other sites More sharing options...
iantt Posted May 4, 2016 Share Posted May 4, 2016 camber and tracking will be fine, the strut can only fit back in the same position, as you point out tge bolt holes are not oval, camber is not adjustable. only if your changing a lower arm or trackrod end should you need to have tracking checked 1 Quote Link to comment Share on other sites More sharing options...
Ian Lanc Posted May 5, 2016 Author Share Posted May 5, 2016 Thanks for the replies guys. Like I say it drives as good as it did before hand, but wanted a second opinion. Ian. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.